IDE-4K-25-256 SanDisk, IDE-4K-25-256 Datasheet - Page 14
![IDE4K FLASH DISK 256MB](/photos/1/47/14759/ide-4k-25_series_sml.jpg)
IDE-4K-25-256
Manufacturer Part Number
IDE-4K-25-256
Description
IDE4K FLASH DISK 256MB
Manufacturer
SanDisk
Series
IDE 4000r
Datasheet
1.IDE-4K-25-3584.pdf
(23 pages)
Specifications of IDE-4K-25-256
Memory Size
256MB
Memory Type
FLASH
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
Other names
585-1023
3.
I
C
NTERFACE
ONNECTORS
The IDE 4000 has a 2-mm pitch interface connector located on the rear panel. It accesses the DC
power source and the IDE bus through a non-shielded 44-pin flat cable. Figure 6 provides an
example of a connector that can be used to interface with this connector, but any compatible
connectors may be used.
Figure 6: IDE 4000 Interface Connector
In order to prevent damage to the disk by connecting the cable with a 180º rotation, ensure that
the special plastic key at pin 20 mating connector is blocked, as shown in Figure 6. This key
should be ordered from the connector manufacturer.
IDE Cable
The cable length should not exceed 18 inches.
14
Product Specification and User Manual IDE 4000 Flash Disk
34-PS-0304-00 Rev. 2.1