UXB02070G1002TCU00 Vishay, UXB02070G1002TCU00 Datasheet - Page 5

• Manufacturer Part Number: UXB02070G1002TCU00
• Description: RES 10K OHM METL FILM .25W .01%
• Manufacturer: Vishay
• Series: UXB 0207r

Specifications of UXB02070G1002TCU00

• Resistance (ohms): 10K
• Power (watts): 0.25W, 1/4W
• Composition: Metal Film
• Temperature Coefficient: ±5ppm/°C
• Tolerance: ±0.01%
• Size / Dimension: 0.098" Dia x 0.248" L (2.50mm x 6.30mm)
• Lead Style: Through Hole
• Package / Case: Axial
• Resistance In Ohms: 10.0K
• Case: Axial
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Features: -
• Height: -
• Other names: UXB 0207-05 0.01 % CU 10K

UXA 0204, UXB 0207, UXE 0414
Vishay Beyschlag
TESTS AND REQUIREMENTS
Essentially all tests are carried out in accordance with the
following specifications:
EN 60115-1, Generic specification (includes tests)
EN 140100, Sectional specification (includes schedule for
qualification approval)
CECC 40101-806, Detail specification (includes schedule for
conformance inspection)
Most of the components are approved in accordance with the
European CECC-system, where applicable. The Test
Procedures and Requirements table contains only the most
important tests. For the full test schedule refer to the
documents listed above. The testing also covers most of the
requirements specified by EIA/IS-703 and JIS-C-5202.
The tests are carried out in accordance with IEC 60068-2-xx
test method and under standard atmospheric conditions in
accordance with IEC 60068-1, 5.3. Climatic category
www.vishay.com
92
CLAUSE
60115-1
TEST PROCEDURES AND REQUIREMENTS
4.5
4.8
4.25.1
4.25.3
4.24
IEC
60068-2-xx
METHOD
78 (Cab)
TEST
IEC
-
-
-
-
upper category
Endurance at
Temperature
temperature
steady state
Damp heat,
Resistance
Endurance
coefficient
(ΔR/R)
TEST
For technical questions, contact:
High Precision Thin Film Leaded Resistors
(40 ± 2) °C; 56 days; (93
Stability for product
types:
At 20/LCT/20 °C and
1.5 h ON; 0.5 h OFF
Room temperature;
U =
125 °C; 1000 h
PROCEDURE
20/UCT/20 °C
70 °C; 2000 h
85 °C; 1000 h
85 °C; 8000 h
± 3) % RH
U = U
P
70
max.
UXA 0204
UXB 0207
UXE 0414
x R
;
or
± (0.05 % R + 0.01 Ω) ± (0.05 % R + 0.01 Ω) ± (0.05 % R + 0.01 Ω)
± (0.02 % R + 0.01 Ω) ± (0.03 % R + 0.01 Ω) ± (0.04 % R + 0.01 Ω)
± (0.04 % R + 0.01 Ω) ± (0.06 % R + 0.01 Ω) ± (0.08 % R + 0.01 Ω)
± (0.04 % R + 0.01 Ω) ± (0.06 % R + 0.01 Ω) ± (0.08 % R + 0.01 Ω)
± (0.04 % R + 0.01 Ω) ± (0.05 % R + 0.01 Ω) ± (0.06 % R + 0.01 Ω)
[e-mail]
100 Ω to 100 kΩ
100 Ω to 250 kΩ
100 Ω to 100 kΩ
LCT/UCT/56 (rated temperature range: Lower category
temperature, upper category temperature; damp heat, long
term, 56 days) is valid.
Unless otherwise specified the following values apply:
Temperature: 15
Relative humidity: 45 % to 75 %
Air pressure: 86 kPa to 106 kPa (860 mbar to 1060 mbar).
For testing the components are mounted on a test board in
accordance with IEC 60115-1, 4.31 unless otherwise
specified.
In the Test Procedures and Requirements table only the
tests and requirements are listed with reference to the
relevant clauses of IEC 60115-1 and IEC 60068-2-xx test
method. A short description of the test procedure is also
given.
± 0.25 %; ± 0.1 %; ± 0.05 %; ± 0.01 %
± 10 ppm/K; ± 05 ppm/K; ± 02 ppm/K
PERMISSIBLE CHANGE (ΔR)
°
C to 35
> 100 kΩ to 221 kΩ
> 250 kΩ to 301 kΩ
> 100 kΩ to 511 kΩ
40.2 Ω to < 100 Ω;
REQUIREMENTS
22 Ω to < 100 Ω;
22 Ω to < 100 Ω;
°
C
Document Number: 28726
> 301 kΩ to 1 MΩ
10 Ω to < 40.2 Ω;
Revision: 12-Oct-09
-
-