C0603C0G1E1R5BTQ TDK Corporation, C0603C0G1E1R5BTQ Datasheet - Page 9

• Manufacturer Part Number: C0603C0G1E1R5BTQ
• Description: CAP CER 1.5PF 25V C0G 0201
• Manufacturer: TDK Corporation
• Series: Cr

Specifications of C0603C0G1E1R5BTQ

• Capacitance: 1.5pF
• Voltage - Rated: 25V
• Tolerance: ±0.1pF
• Temperature Coefficient: C0G, NP0
• Mounting Type: Surface Mount, MLCC
• Operating Temperature: -55°C ~ 125°C
• Features: High Q, Low Loss
• Applications: RF, Microwave, High Frequency
• Package / Case: 0201 (0603 Metric)
• Size / Dimension: 0.024" L x 0.012" W (0.60mm x 0.30mm)
• Thickness: 0.30mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Ratings: -
• Lead Spacing: -
• Other names: 445-5528-2

* This series is available through the distribution channel only. Please see
• All specifications are subject to change without notice. Please read the precautions before using the product.
No.
14
15
General
Specifications
Item
Moisture Resistance
External
appearance
Capacitance
Q (Class 1)
Insulation
Resistance
Life
External
appearance
Capacitance
Q (Class 1)
Insulation
Resistance
Performance
No mechanical damage.
500MΩ min.
No mechanical damage.
1,000MΩ min.
Rated Capacitance
C ≥ 30pF
10pF ≤ C < 30pF
C < 10pF
Characteristics
Class 1
Characteristics
Class 1
Rated Capacitance
C ≥ 30pF
C < 30pF
C0G
C0G
C : Rated capacitance (pF)
C : Rated capacitance (pF)
Change from the
value before test
Capacitance drift within
±3% or ±0.3pF,
whichever larger.
Change from the
value before test
Capacitance drift within
±7.5% or ±0.75pF,
whichever larger.
www.tdk.com/distributor.php
Q
350 min.
275 + 5/2×C min.
200 + 10×C min.
Q
200 min.
100 + 10/3×C min.
C0603 Series — High Q Capacitors
for a list of authorized distributors.
Test or Inspection Method
Reflow solder the capacitors on P.C. board (shown in
Appendix 1) before testing.
Apply the rated voltage at temperature 40±2ºC and 90
to 95%RH for 500 +24,0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitor in ambient conditions for 6 to 24h
before measurement.
Use this measurement for initial value.
Reflow solder the capacitor on P.C. board (shown in
Appendix 1) before testing.
Apply 2x rated voltage at 125±2ºC for 1,000 +48, 0h.
Charge/discharge current shall not exceed 50mA.
Leave the capacitors in ambient condition for 6 to 24h
before measurement.
Use this measurement for initial value.
US Catalog // C0603 Series — High Q // Version A11