73S1215F-44IM/F Maxim Integrated Products, 73S1215F-44IM/F Datasheet - Page 14
![IC SMART CARD READER 44-QFN](/photos/37/62/376285/5471_800w400h_sml.jpg)
73S1215F-44IM/F
Manufacturer Part Number
73S1215F-44IM/F
Description
IC SMART CARD READER 44-QFN
Manufacturer
Maxim Integrated Products
Datasheet
1.73S1209F-44IMF.pdf
(93 pages)
Specifications of 73S1215F-44IM/F
Core Processor
80515
Core Size
8-Bit
Speed
24MHz
Connectivity
I²C, SmartCard, UART/USART, USB
Peripherals
LED, POR, WDT
Number Of I /o
9
Program Memory Size
64KB (64K x 8)
Program Memory Type
FLASH
Ram Size
2K x 8
Voltage - Supply (vcc/vdd)
2.7 V ~ 5.5 V
Oscillator Type
Internal
Operating Temperature
-40°C ~ 85°C
Package / Case
*
Processor Series
1215x
Core
80515
Data Ram Size
2 KB
Interface Type
I2C, UART
Maximum Clock Frequency
24 MHz
Number Of Programmable I/os
9
Number Of Timers
3
Operating Supply Voltage
2.7 V to 3.6 V
Maximum Operating Temperature
+ 85 C
Mounting Style
SMD/SMT
3rd Party Development Tools
PK51, CA51, A51, ULINK2
Development Tools By Supplier
73S1215F-EB, 73S1215F-EB-Lite, 73S1215F-IM44 DK, 73S1215F-IM44 EB, 73S1215F-IM68 DK, 73S1215F-IM68 EB
Minimum Operating Temperature
- 40 C
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Eeprom Size
-
Data Converters
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Company:
Part Number:
73S1215F-44IM/F
Manufacturer:
Microchip
Quantity:
47
Part Number:
73S1215F-44IM/F
Manufacturer:
MAXIM/美信
Quantity:
20 000
73S12xxF Software User Guide
UG_12xxF_016
The Preprocessor Symbol “MULTI8010” (refer to
Figure
4) is used for a hardware configuration where
multiple 8010 parts are used to drive up to four external smart card slots (any slot that is higher than
ST
). Associated library or project files set up for a multiple 8010 configuration have the letter ‘M’ in
ICC_1
their filename. For example, the Low-Level library that supports the MULTI8010 configuration would be
named LAPI-MBL.lib.
The Preprocessor Symbol “SINGLE8010” is used instead of “MULTI8010” for a hardware configuration
where a single 8010 and a custom mux are used to drive up to four external smart card slots. Associated
library or project files set up for single 8010 configuration have the letter ‘S’ in their filename. This
configuration is supported under the Serial/RS232 interface only.
The preprocessor symbol “BOOTLOADER” is used to incorporate the Serial/RS232 boot loader portion of
the LAPI. This directive is used when linking to a library with ‘BL’ in its name. Interrupt vectors start at
address 0x0200 due to the BOOTLOADER’s residence. All associated library or project files set up for
the Boot Loader configuration have the letters ‘BL’ in their filename.
TSCP-CCID Release version 2.00 or higher (a separate release built specifically for Teridian’s
Pseudo-CCID RS-232 Serial interface) has configured all its build files for the appropriate build
environment and specific configuration. It is NOT recommended that these values be changed, in other
words, the project files (*.uv2) should not be altered. Contact a Teridian Sales Representative for further
inquiry.
2.2.6 Build Environment with the USB DFU Boot Loader
Starting with the Teridian CCID USB Release version 2.00 or higher, the DFU Boot Loader is included in
the Low-Level library (LAPI-MDFU.lib). The DFU Boot Loader has a different architecture than the
Serial/RS232 Boot Loader described in above section. It is a stand-alone firmware application that runs
as a DFU class (0xFE) device whereas the Serial/RS-232 Boot Loader is part of the LAPI library. When
linking the application with the libraries containing the DFU boot loader a few rules must be adhered to.
Follow the instructions described below.
The DFU boot loader is supported under the USB interface only.
14
Rev. 1.50