LTPL-P013WS57 Lite-On Electronics, LTPL-P013WS57 Datasheet - Page 13
![no-image](/images/manufacturer_photos/0/3/391/lite-on_electronics_sml.jpg)
LTPL-P013WS57
Manufacturer Part Number
LTPL-P013WS57
Description
LED COOL WHITE WTR CLR P01 SMD
Manufacturer
Lite-On Electronics
Series
P01r
Specifications of LTPL-P013WS57
Color
White, Cool
Current - Test
350mA
Luminous Flux @ Current - Test
*
Current - Max
700mA
Lumens @ Current - Max
*
Lumens/watt @ Current - Test
*
Voltage - Forward (vf) Typ
3.5V
Wavelength
5500K
Lens Style/size
Round, 5.9mm
Viewing Angle
140°
Mounting Type
Surface Mount
Package / Case
2-SMD, Flat Leads
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
160-1843-2
9. Cautions
Part No.: LTPL-P013WS57 DATA SHEET (PRELIMINARY)
BNC-OD-C131/A4
The LEDs described here are intended to be used for ordinary electronic equipment (such as office
equipment, communication equipment and household applications).Consult Liteon’s Sales in advance
for information on applications in which exceptional reliability is required, particularly when the failure
or malfunction of the LEDs may directly jeopardize life or health (such as in aviation, transportation,
traffic control equipment, medical and life support systems and safety devices).
The storage ambient for the LEDs should not exceed 30°C temperature or 70% relative humidity.
It is recommended that LEDs out of their original packaging are soldered within 72hrs. For extended
storage out of their original packaging, it is recommended that the LEDs were stored in a sealed
container with appropriate desiccant, or a desiccators with nitrogen ambient. LEDs stored out of their
original packaging for more than 72hrs should be baked at about 60℃ for at least 24 hours before
solder assembly.
An LED is a current-operated device. In order to ensure intensity uniformity on multiple LEDs
connected in parallel in an application, it is recommended that a current limiting resistor be
incorporated in the drive circuit, in series with each LED as shown in Circuit A below.
(A) Recommended circuit.
(B) The brightness of each LED might appear different due to the differences in the I-V characteristics
of those LEDs.
9.3. Drive Method
9.1. Application
9.2. Storage
Circuit model A
LITE-ON TECHNOLOGY CORPORATION
LED
Property of Lite-On Only
Circuit model B
LED
Page:
13
of
15