78Q8430-ARM9-EVM Maxim Integrated Products, 78Q8430-ARM9-EVM Datasheet - Page 10

• Manufacturer Part Number: 78Q8430-ARM9-EVM
• Description: EVALUATION MODULE 78Q8430 ARM9
• Manufacturer: Maxim Integrated Products

Specifications of 78Q8430-ARM9-EVM

• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

2.3 System Startup
STEP 1: On the Linux Host, set the testing port IP address to 192.168.10.100 (the S3CEB2410 platform
boots with IP address 192.168.10.99).
STEP 2: Open a full height xterm or kconsole window on the Linux Host.
STEP 3: Start minicom on the Linux Host at the xterm/kconsole command prompt:
STEP 4: Turn on the S3CEB2410 board power. Refer to the S3CEB2410 documentation for additional
information. The 78Q8430 Embest Evaluation Board receives its power through the Embest bus interface
on the S3CEB2410 Evaluation Board.
STEP 5: Boot the S3CEB2410 Board. Console messages must appear in the minicom window after
power on.
STEP 6: When boot up completes, enter the following at the prompt:
STEP 7: On the Linux Host, issue the following ping command to verify the connection to the target:
10
78Q8430 ARM9(920T) Embest Evaluation Board User Manual
▪
▪
▪
~# minicom
arp -s 192.168.10.100 00:0E:2E:5B:25:86
ping 192.168.10.99
Hit the space bar at the first boot prompt
Respond with: cpu set 200 2
On the next prompt, respond: boot
UM_8430_007
Rev. 1.0