USB-RS232-WE-1800-BT FTDI, Future Technology Devices International Ltd, USB-RS232-WE-1800-BT Datasheet - Page 2
![MODULE USB - RS232 WITH CABLE](/photos/13/97/139719/mfg_usb-rs232-we-1800-bt_sml.jpg)
USB-RS232-WE-1800-BT
Manufacturer Part Number
USB-RS232-WE-1800-BT
Description
MODULE USB - RS232 WITH CABLE
Manufacturer
FTDI, Future Technology Devices International Ltd
Series
USBmadeEZ-UARTr
Datasheet
1.USB-RS232-WE-1800-BT.pdf
(15 pages)
Specifications of USB-RS232-WE-1800-BT
Usage
USB to RS232
Convert From (adapter End)
USB - A, Plug
Convert To (adapter End)
Cable, 6 Wire Leads
Length
5.90' (1.80m)
Shielding
Unshielded
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
768-1065
USB-RS232-WE-1800-BT
USB-RS232-WE-1800-BT
1
The USB_RS232 cables are a family of USB to RS232 levels serial UART converter cables incorporating
FTDI’s FT232RQ USB to serial UART interface IC device which handles all the USB signalling and
protocols. The cables provide a fast, simple way to connect devices with a RS232 level serial UART
interface to USB.
Each USB-RS232 cable contains a small internal electronic circuit board, utilising the FT232R, which is
encapsulated into the USB connector end of the cable. The FT232R datasheet, DS_FT232R, is available at
http://www.ftdichip.com. The integrated electronics also include the RS232 level shifter plus Tx and Rx
LEDs which give a visual indication of traffic on the cable (if transparent USB connector specified).
The other end of the cable is bare, tinned wire ended connections by default, but can be customised
using different connectors to support various applications.
Cables are FCC, CE, RoHS compliant.
The USB side of the cable is USB powered and USB 2.0 full speed compatible. Each cable is 1.8m long
and supports a data transfer rate up to 1 Mbaud. Each cable supports the FTDIChip-ID™, with a unique
USB serial number programmed into the FT232R. This feature can be used to create a security or
password protected file transfer access using the cable. Further information and examples on this feature
are available at
The USB-RS232 cables require USB drivers, available free from http://www.ftdichip.com, which are
used to make the FT232R in the cable appear as a virtual COM port (VCP). This then allows the user to
communicate with the USB interface via a standard PC serial emulation port (for example TTY). Another
FTDI USB driver, the D2XX driver, can also be used with application software to directly access the
FT232R on the cable though a DLL. This is illustrated in the Figure 1.1
Figure 1.1 Using the USB-RS232 Cable
Description
TTY
TTY
Software application access to USB via D2XX
http://www.ftdichip.com
Copyright © 2010 Future Technology Devices International Limited
USB
USB
Virtual COM Port
USB TO RS232 SERIAL CONVERTER RANGE OF CABLES Datasheet Version 1.3
USB_RS232
under
FTDIChip-ID
Various Connector
Various Connector
Wire Ended
Wire Ended
Customised connectors
Customised connectors
Projects.
Options
Options
Document Reference No.: FT_000077
Clearance No.: FTDI# 51
1