AA116-72LF Skyworks Solutions Inc, AA116-72LF Datasheet - Page 2

• Manufacturer Part Number: AA116-72LF
• Description: ATTENUATOR DGTL GAAS 1BIT SOT-5
• Manufacturer: Skyworks Solutions Inc

Specifications of AA116-72LF

• Attenuation Value: 15dB
• Frequency Range: 4MHz ~ 2GHz
• Impedance: 50 Ohm
• Package / Case: SC-74A, SOT-753
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Power (watts): -
• Tolerance: -
• Other names: 863-1233-2

DATA SHEET • AA116-72LF 1-BIT DIGITAL ATTENUATOR
Table 1. AA116-72LF Signal Descriptions
Table 2. AA116-72LF Absolute Maximum Ratings
Electrical and Mechanical Specifications
The absolute maximum ratings of the AA116-72LF are provided in
Table 2. Electrical specifications are provided in Table 3.
Typical performance characteristics of the AA116-72LF are
illustrated in Figures 3 through 6.
2
CAUTION: Although this device is designed to be as robust as possible, Electrostatic Discharge (ESD) can damage this device. This device
Note: Exposure to maximum rating conditions for extended periods may reduce device reliability. There is no damage to device with only one parameter set at the limit and all other
RF input power
Supply voltage
Control voltage
Operating temperature
Storage temperature
Pin #
1
2
3
parameters set at or below their nominal value. Exceeding any of the limits listed here may result in permanent damage to the device.
must be protected at all times from ESD. Static charges may easily produce potentials of several kilovolts on the human body
or equipment, which can discharge without detection. Industry-standard ESD precautions should be used at all times.
J1
RF_GND
J2
Skyworks Solutions, Inc. • Phone [781] 376-3000 • Fax [781] 376-3100 • [e-mail] • www.skyworksinc.com
Name
October 5, 2010 • Skyworks Proprietary Information • Products and Product Information are Subject to Change Without Notice • 200209E
Parameter
RF port. Must be DC blocked.
RF ground. Must be AC-coupled to ground.
RF port. Must be DC blocked.
Description
P
V
V
T
T
S
CTL
IN
OP
STG
Symbol
Pin #
The state of the AA116-72LF is determined by the logic provided
in Table 4.
4
5
V1
V2
Minimum
Name
–0.2
–40
–65
0.5 W @ 50 MHz 0/8 V
1 W > 500 MHz 0/8 V
DC control bias
DC control bias
Maximum
+150
+8.0
+85
8
Description
Units
dBm
dBm
C
C
V
V