AD6654/PCB Analog Devices Inc, AD6654/PCB Datasheet - Page 83

• Manufacturer Part Number: AD6654/PCB
• Description: BOARD EVALUATION FOR AD6654
• Manufacturer: Analog Devices Inc

Specifications of AD6654/PCB

• Module/board Type: Evaluation Board
• For Use With/related Products: AD6554
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant

When this bit is cleared, AGC5 data does not appear on Output
Port C.
<20>: Port C, AGC4 Enable Bit. Similar to Bit 21 for AGC4.
<19>: Port C, AGC3 Enable Bit. Similar to Bit 21 for AGC3.
<18>: Port C, AGC2 Enable Bit. Similar to Bit 21 for AGC2.
<17>: Port C, AGC1 Enable Bit. Similar to Bit 21 for AGC1.
<16>: Port C, AGC0 Enable Bit. Similar to Bit 21 for AGC0.
<15>: Port B Append RSSI Bit. When this bit is set, an RSSI
word is appended to every I/Q output sample, regardless of
whether the RSSI word is updated in the AGC. When this bit is
cleared, an RSSI word is appended to an I/Q output sample only
when the RSSI word is updated. The RSSI word is not output for
subsequent I/Q samples until the next time the RSSI is updated
in the AGC.
<14>: Port B, Data Format Bit. When this bit is set, the port is
configured for 8-bit parallel I/Q mode. When this bit is cleared,
the port is configured for 16-bit interleaved I/Q mode. See the
Parallel Port Output section.
<13>: Port B, AGC5 Enable Bit. When this bit is set, AGC5 data
(I/Q data) is output on Parallel Output Port A (data bus). When
this bit is cleared, AGC5 data does not appear on Output Port
C.
<12>: Port B, AGC4 Enable Bit. Similar to Bit 13 for AGC4.
<11>: Port B, AGC3 Enable Bit. Similar to Bit 13 for AGC3.
<10>: Port B, AGC2 Enable Bit. Similar to Bit 13 for AGC2.
<9>: Port B, AGC1 Enable Bit. Similar to Bit 13 for AGC1.
<8>: Port B, AGC0 Enable Bit. Similar to Bit 13 for AGC0.
<7>: Port A Appended RSSI Bit. When this bit is set, an RSSI
word is append to every I/Q output sample, regardless of
whether the RSSI word is updated in the AGC. When this bit is
cleared, an RSSI word is appended to an I/Q output sample only
when the RSSI word is updated. The RSSI word is not output for
subsequent I/Q samples until the next time RSSI is updated
again in the AGC.
<6>: Port A, Data Format Bit. When this bit is set, the port is
configured for 8-bit parallel I/Q mode. When this bit is cleared,
the port is configured for 16-bit interleaved I/Q mode. See the
Parallel Port Output section.
<5>: Port A, AGC5 Enable Bit. When this bit is set, AGC5 data
(I/Q data) is output on parallel output Port A (data bus). When
this bit is cleared, AGC5 data does not appear on output Port C.
<4>: Port A, AGC4 Enable Bit. Similar to Bit 5 for AGC4.
Rev. 0 | Page 83 of 88
<3>: Port A, AGC3 Enable Bit. Similar to Bit 5 for AGC3.
<2>: Port A, AGC2 Enable Bit. Similar to Bit 5 for AGC2.
<1>: Port A, AGC1 Enable Bit. Similar to Bit 5 for AGC1.
<0>: Port A, AGC0 Enable Bit. Similar to Bit 5 for AGC0.
Output Port Control <9:0>
<9:8>: PCLK Divisor Bits. When a parallel port is in master
mode, the PCLK is derived from the PLL_CLK. These bits
define the value of the divisor used to divide the PLL_CLK to
obtain the PCLK. These bits are don’t care in slave mode.
Table 42. PCLK Divisor Bits
PCLK Divisor <7:6>
00
01
10
11
<7>: PCLK Master Mode Bit. When the PCLK master mode bit
is set, the PCLK pin is configured as an output and the PCLK is
driven by the PLL_CLK. Data is transferred out of the AD6654
synchronous to this output clock. When this bit is cleared, the
PCLK pin is configured as an input. The user is required to
provide a PCLK, and data is transferred out of the AD6654
synchronous to this input clock. On power-up, this bit is cleared
to avoid contention on the PCLK pin.
<6:4>: Reserved. These bits must be written with Logic 0.
<3:0>: Stream Control Bits. These bits are described in Table 43.
Table 43. Stream Control Bits
Stream
Control
Bits
0000
0001
0010
0011
0100
0101
0110
0111
1000
1001
Default
Output Streams (str0, str1, str2,
str3, str4, str5)
Ch 0 and Ch 1 combined; Ch 2, Ch 3,
Ch 4, Ch 5 independent
Ch 0, Ch 1, Ch 2 combined; Ch 3, Ch 4,
Ch 5 independent
Ch 0, Ch 1, Ch 2, Ch 3 combined; Ch 4,
Ch 5 independent
Ch 0, Ch 1, Ch 2, Ch 3, Ch 4 combined;
Ch 5 independent
Ch 0, Ch 1, Ch 2, Ch 3, Ch 4, Ch 5
combined
Ch 0, Ch 1, Ch 2 combined; Ch 3, Ch 4,
Ch 5 combined
Ch 0, Ch 1 combined; Ch 2, Ch 3
combined; Ch 4, Ch 5 combined
Ch 0, Ch 1 combined; Ch 2, Ch 3
combined; Ch 4, Ch 5 independent
Ch 0, Ch 1 , Ch 2 combined; Ch 3, Ch 4
combined; Ch 5 independent
Ch 0, Ch 1, Ch 2, Ch 3 combined; Ch 4,
Ch 5 combined.
Independent channels
Divisor Value
1
2
4
8
Number of
Streams
5
4
3
2
1
2
3
4
3
2
6
AD6654