UPC3240TB-E3-A CEL, UPC3240TB-E3-A Datasheet - Page 17

• Manufacturer Part Number: UPC3240TB-E3-A
• Description: MMIC AMPLIFIER 6 PIN MINIMOLD
• Manufacturer: CEL

Specifications of UPC3240TB-E3-A

• Current - Supply: 13mA
• Frequency: 250MHz ~ 3GHz
• Gain: 25dB
• Noise Figure: 4.3dB
• P1db: 1dBm
• Package / Case: 6-MINIMOLD
• Rf Type: General Purpose
• Test Frequency: 1GHz
• Voltage - Supply: 3 V ~ 3.6 V
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

NOTES ON CORRECT USE
(1) Observe precautions for handling because of electro-static sensitive devices.
(2) Form a ground pattern as widely as possible to minimize ground impedance (to prevent undesired oscillation).
(3) The bypass capacitor should be attached to the V
(4) The DC cut capacitor must be attached to input and output pin.
RECOMMENDED SOLDERING CONDITIONS
and conditions other than those recommended below, contact your nearby sales office.
Infrared Reflow
Wave Soldering
Partial Heating
Caution Do not use different soldering methods together (except for partial heating).
This product should be soldered and mounted under the following recommended conditions. For soldering methods
All the ground terminals must be connected together with wide ground pattern to decrease impedance difference.
Soldering Method
Peak temperature (package surface temperature)
Time at peak temperature
Time at temperature of 220°C or higher
Preheating time at 120 to 180°C
Maximum number of reflow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (molten solder temperature)
Time at peak temperature
Preheating temperature (package surface temperature) : 120°C or below
Maximum number of flow processes
Maximum chlorine content of rosin flux (% mass)
Peak temperature (terminal temperature)
Soldering time (per side of device)
Maximum chlorine content of rosin flux (% mass)
Data Sheet PU10751EJ01V0DS
Soldering Conditions
CC
line.
: 260°C or below
: 10 seconds or less
: 60 seconds or less
: 120±30 seconds
: 3 times
: 0.2%(Wt.) or below
: 260°C or below
: 10 seconds or less
: 1 time
: 0.2%(Wt.) or below
: 350°C or below
: 3 seconds or less
: 0.2%(Wt.) or below
Condition Symbol
μ
WS260
HS350
IR260
PC3240TB
17