0600-00019 Laird Technologies, 0600-00019 Datasheet - Page 28

• Manufacturer Part Number: 0600-00019
• Description: ANTENNA 915MHZ 1/2WAVE 7"RA MMCX
• Manufacturer: Laird Technologies

Specifications of 0600-00019

• Antenna Type: Whip: 1/2 Wave, Swivel, Tilt (Right Angle)
• Number Of Bands: 1
• Frequency: 902MHz ~ 928MHz
• Vswr: 2
• Gain: 2dBi
• Termination: MMCX R/A Plug
• Mounting Type: Chassis Mount
• Height (max): 7.2" (182.88mm)
• Impedance: 50 Ohms
• Technology Type: Wireless Transceiver Antenna
• Termination Style: MMCX
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant

EEPROM Byte Write
Upon receiving this command, a transceiver will
write the data byte to the address specified but
will not echo it back to the OEM Host until the
EEPROM write cycle is complete.
take as long as 10ms to complete.
Following the write cycle, a transceiver will
transmit the data byte to the OEM Host. Multiple
byte EEPROM writes are allowed up to a length of
128 bytes. An EEPROM boundary exists between
addresses 7Fh and 80h. No single EEPROM write
command shall write to addresses on both sides
of that EEPROM boundary.
Reset Command
The OEM Host issues this command to perform a
soft reset of the transceiver.
Any
Commands will be overwritten by values stored in
the EEPROM.
The EEPROM is limited to 20,000 write cycles. In order to avoid unnecessary writes, it is recommended that you perform a
read before issuing the write command to verify that the byte requires writing. It is possible while performing an EEPROM
write without a stable power supply that the EEPROM can become corrupted, rendering the radio inoperable.
transceiver
Quick Tip:
settings
modified
The write can
by
CC
Command: CCh C1h Data1 Data2 Data
Number of bytes returned: 4+
Response: CCh Data1 Data2 Data
Parameter Range:
Data1 = EEPROM address
Data2 = Length (1-80h)
Data = Data written
Command: CCh FFh
Number of bytes returned: None
Response: None
28