A09-HSM-7 Digi International/Maxstream, A09-HSM-7 Datasheet - Page 62

• Manufacturer Part Number: A09-HSM-7
• Description: ANT 900MHZ 7" STRAIGHT W/RPSMA
• Manufacturer: Digi International/Maxstream

Specifications of A09-HSM-7

• Antenna Type: Whip: 1/2 Wave
• Number Of Bands: 1
• Frequency: 915MHz (902MHz ~ 928MHz)
• Vswr: 2
• Gain: 2dBi
• Termination: RP-SMA
• Mounting Type: Connector
• Height (max): 7.0" (177.8mm)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

9XTend™ OEM RF Module ‐ Product Manual v2.x4x [2007.01.04]
Adapters
NULL Modem Adapter (male-to-male)
NULL Modem Adapter (female-to-female)
Serial Loopback Adapter
The development kit includes several adapters that facilitate the following functions:
Part Number: JD2D2-CDN-A (Black, DB-9 M-M) The male-to-male NULL modem adapter is
used to connect two DCE devices. A DCE device connects with a straight-through cable to the male
serial port of a computer (DTE).
Figure B‐05. Male NULL modem adapter and pinouts
Figure B‐06. Example of a MaxStream Radio Modem (DCE Device) connecting to another DCE device)
Part Number: JD3D3-CDN-A (Gray, DB-9 F-F) The female-to-female NULL modem adapter is
used to verify serial cabling is functioning properly. To test cables, insert the female-to-female
NULL modem adapter in place of a pair of module assemblies (RS-232 interface board + XTend RF
Module) and test the connection without modules in the connection.
Figure B‐07. Female NULL modem adapter and pinouts
Part Number: JD2D3-CDL-A (Red, DB-9 M-F) The serial loopback adapter is used for range
testing. During a range test, the serial loopback adapter configures the module to function as a
repeater by looping serial data back into the radio for retransmission.
Figure B‐08. Serial loopback adapter and pinouts
© 2007 MaxStream, Inc.
• Performing Range Tests
• Testing Cables
• Connecting to other RS-232 DCE and DTE devices
• Connecting to terminal blocks or RJ-45 (for RS-485/422 devices)
Appendix B: Development Guide
62