20-101-1202 Rabbit Semiconductor, 20-101-1202 Datasheet - Page 8

• Manufacturer Part Number: 20-101-1202
• Description: RCM4400W (FCC CERTIFIED)
• Manufacturer: Rabbit Semiconductor
• Type: Wi-Fi / 802.11.br

Specifications of 20-101-1202

• Frequency: 2.4GHz
• Wireless Frequency: 58.98 MHz
• Supported Devices: RAM4400W
• Tool / Board Applications: Wireless Connectivity-ZigBee, RF, Infrared, USB
• Development Tool Type: Hardware / Software - Dev Kit (Dev Tool)
• Rohs Compliant: Yes
• For Use With/related Products: RCM4400W
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 316-1143

1.1 RCM4400W Features
• Small size: 1.84" × 2.85" × 0.50"
• Microprocessor: Rabbit 4000 running at 58.98 MHz
• Up to 35 general-purpose I/O lines configurable with up to four alternate functions
• 3.3 V I/O lines with low-power modes down to 2 kHz
• Six CMOS-compatible serial ports — four ports are configurable as a clocked serial port
• Alternate I/O bus can be configured for 8 data lines and 6 address lines (shared with
• 512KB flash memory, 512KB data SRAM, 512KB fast program-execution SRAM
• UBEC single-chip 802.11b transceiver
• Real-time clock
• Watchdog supervisor
Currently there is one RCM4400W production model. Table 1 summarizes its main features.
2
(47 mm × 72 mm × 13 mm)
(SPI), and two ports are configurable as SDLC/HDLC serial ports.
parallel I/O lines), I/O read/write
Microprocessor
Flash Memory
Data SRAM
Fast Program-Execution
SRAM
Serial Ports
Wi-Fi
NOTE: There is a special version of the RCM4400W RabbitCore module for Japan. It is
functionally identical to the standard RCM4400W module and uses the same compo-
nents, but has been assembled to meet the Japan regulatory requirements. Be sure to
order the correct version for the market where you plan to use the RCM4400W. The
two versions can be distinguished by the labels on the RF shield as shown below.
Feature
Standard Release Label
6 shared high-speed, CMOS-compatible ports:
Table 1. RCM4400W Features
6 are configurable as asynchronous serial ports;
4 are configurable as clocked serial ports (SPI);
2 are configurable as SDLC/HDLC serial ports;
1 asynchronous serial port is used during programming
802.11b standard, ISM 2.4 GHz
Rabbit
®
RCM4400W
4000 at 58.98 MHz
512KB
512KB
512KB
Japan Version Label
RabbitCore RCM4400W