X09-019-DK Digi International/Maxstream, X09-019-DK Datasheet - Page 3

• Manufacturer Part Number: X09-019-DK
• Description: KIT DEV FOR 900MHZ 19.2K 100MW
• Manufacturer: Digi International/Maxstream
• Series: XStream™r
• Type: Transceiverr

Specifications of X09-019-DK

• Frequency: 900MHz
• For Use With/related Products: XStream Module (900 MHz, 19.2kbps) US and Canada
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: X09-019NSC-DK; X09-019NSC-DK

Range Test Execution
Range Test
Figure 3. PC Se�ings tab
3
Use the "PC Settings" and "Range Test" tabs of the X-CTU Software to:
1. Launch the X-CTU Software: (Start --> Programs --> MaxStream --> X-CTU)
2
3
4. Click on the "Range Test" tab. [Figure 4]
5
7. Move Radio2 (with loopback connector) away from Radio1 to find the
• Assign which PC Serial Com Port to use when communicating with
• Measure XStream OEM RF Module's range [steps 1-7 of "Range Test"]
Under the "PC Settings" tab [Figure 3], select the PC serial com port
from the list that will be used to connect to Radio1.
Select the Baud rate that matches the fixed RF data rate of Radio1.
Use default values for remaining fields. [Figure 3]
(Optional) Check the box in the "RSSI" checkbox to enable its display.
Click the "Start" button to begin the range test.
module's maximum range.
Default Values
Refer to XStream Module part number
to determine its default (& fixed) RF data rate:
X09-009... =
X09-019... =
X24-009... =
X24-019... =
XStream module assemblies [step 2 of "Range Test"]
(Packet Information)
9600 bps
19200
9600
19200
2
PC Com Port
Other Default Values:
Flow Control
Data Bits
Parity
Stop Bits
=
=
=
=
None
1
None
8
5
6
RSSI check box
RSSI stands for "Received Signal Strength Indicator".
Start/(Stop) button
Figure 4. Range Test tab