DRM4000-N00-USB-EVAL Honeywell Microelectronics & Precision Sensors, DRM4000-N00-USB-EVAL Datasheet - Page 3

• Manufacturer Part Number: DRM4000-N00-USB-EVAL
• Description: KIT EVAL DEAD RECKONING MOD USB
• Manufacturer: Honeywell Microelectronics & Precision Sensors
• Series: DRM™r
• Type: GPSr

Specifications of DRM4000-N00-USB-EVAL

• For Use With/related Products: DRM4000
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 342-1063; DRM4000-N00-USB-DEMOS

DRM4000
CONFIGURATION
Configuration information is stored internally in the microprocessor's flash memory. There are a finite number of write
cycles to the flash. The limit will not normally be reached if changes are made manually. Care should be taken if the
writing is made automatically.
Default board orientation is +Y axis up and +Z axis forward. The axes are printed on the module circuit board. This
orientation puts the module flat against the torso.
Default baud rate is 19200.
A factory backup configuration is stored in the module. If an error is generated in the normal configuration, the backup
configuration can be read and saved.
Hardware jumpers allow for some interface flexibility. Either CMOS or RS232 logic levels are possible on the port pins;
with RS-232 for the host computer interface, and CMOS logic for the GPS NMEA0183 data input interface.
www.honeywell.com
Z
Z
Y
Y
X
X
3