CY3271-EXP1 Cypress Semiconductor Corp, CY3271-EXP1 Datasheet - Page 22

• Manufacturer Part Number: CY3271-EXP1
• Description: KIT CYFI ENV SENSING
• Manufacturer: Cypress Semiconductor Corp
• Series: PSoC, CyFir
• Type: PSoC, FirstTouchr

Specifications of CY3271-EXP1

• Frequency: 2.4GHz
• Silicon Manufacturer: Cypress
• Silicon Core Number: CY3271
• Kit Application Type: Sensing - Touch / Proximity
• Application Sub Type: Capacitive Touch
• Silicon Family Name: PSoC
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: CY3271
• Lead Free Status / Rohs Status: Supplier Unconfirmed
• Other names: 428-2275

Design Examples
3.2.2
22
Pigtail Thermistor Expansion Board
The Pigtail Thermistor demonstration can be operated by downloading the corresponding .hex file
onto the RF Expansion Board.
1. Connect the RF Expansion Board to the PC Bridge.
2. Insert the PC Bridge into any free USB port of your PC/laptop.
3. Open PSoC Programmer, and load RF_Therm_Bridge.hex from the Hex Files folder.
4. Set Programming Mode to Reset, Device Family to 27x43, Device to CY8C27443 and click
5. Disconnect the PC Bridge and the RF Expansion Board and connect the battery pack and Pigtail
6. Switch on power to the RF Expansion Board by sliding the ON/OFF switch on the battery pack
7. Open the SCD software.
8. Place the PC Bridge in Bind mode using the SCD software. This is described below:
■
■
■
■
■
9. Click Next to go to the Node Binding (2 of 2) window. In this window, assign a name to the newly
10.Select graphical or textual mode of data display. The data is displayed in graphical or text format
11. Click Apply on all successive dialog boxes until the main SCD window reappears.
Program.
Thermistor boards to the latter.
towards the RF Expansion Board.
Click Manage button to set up the sensor network.
In the Manage Network screen, click Add to add a new node.
On the Node Binding screen, click on Begin Binding.
After this function is activated, the user has about 20 seconds to press the bind button on the RF
Expansion Board.
Verify the success of the bind.
bound node. On the Node Configuration pane, click the Load Node configuration from a file
radio button and load Pigtail_Thermistor_Dashboard_Configureation.xml from the Configuration
Files folder located on the CY3271-EXP1 Kit CD
on the SCD screen.
CY3271 EXP1 Environmental Sensing Kit, Spec. # 001-49259 Rev. **