STEVAL-TDR011V1 STMicroelectronics, STEVAL-TDR011V1 Datasheet - Page 4

• Manufacturer Part Number: STEVAL-TDR011V1
• Description: BOARD DEMO PD85006L-E STAP85050
• Manufacturer: STMicroelectronics
• Type: Amplifierr

Specifications of STEVAL-TDR011V1

• Frequency: 400MHz ~ 470MHz
• Maximum Operating Temperature: + 85 C
• Operating Supply Voltage: 13.6 V
• Product: Power Management Development Tools
• For Use With/related Products: PD85006L-E, STAP85050
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 497-10759

Testing procedure
2.4
4/7
The INHIBIT is not internally pulled up, and cannot be left floating. Disable the device when
connected to GND, or to a positive voltage less than 0.18 V.
Thermal information
The temperature is taken on the surface of the PCB. If the PCB with its metal flange is
cooled using an additional heat-sink
dissipated, maintaining the PCB temperature below 70 °C
Figure 4.
Figure 5.
In
both stages of the amplifier.
Figure
c)
6, the two wires are connected together in order to apply the same Vgg bias to
Select the bias gate mode by configuring the wires as shown in
Figure
Temperature trend
PCB with an additional heat-sink
7.
Doc ID 16978 Rev 1
(Figure
5), the main path of the heat (Pa) is easily
(Figure
4).
Figure 6
and
UM0890