CY3653 Cypress Semiconductor Corp, CY3653 Datasheet - Page 4

• Manufacturer Part Number: CY3653
• Description: KIT DEVELOPMENT FOR PROC
• Manufacturer: Cypress Semiconductor Corp
• Series: WirelessUSB™r
• Type: WirelessUSBr

Specifications of CY3653

• Silicon Manufacturer: Cypress
• Application Sub Type: Wireless USB PRoC
• Kit Application Type: Communication & Networking
• Features: Enhanced Productivity Through A Simple Wireless System Solution
• Silicon Family Name: PRoC
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With/related Products: CYWUSB6953
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Other names: 428-1772

4.
The Protocol Master Tutorial shows the simplicity of creating a master device, which utilizes
the standard protocol using the WirelessUSB LS user module (See WirelessUSB LS 2-way
HID Systems for more information on the standard protocol). Initially, it goes through an
automatic bind process with a slave device and is connected. When the button (S1) is pushed,
byte 0x55 is transmitted to the slave. If the button is not being pressed, then the protocol
checks for a valid packet from the slave device. If a valid packet is received,
app_unload_packet() is called from the protocol. In this application app_unload_packet() sets
either LED1 or LED4. To run the Protocol Master Tutorial follow the steps below:
Steps:
Results:
WirelessUSB PRoC™ Development Kit Tutorial
When using the WirelessUSB Listener Tool, byte 0x55 can be seen when transmitted. The
listener needs to be set to listen to PN code 1 and channel 1 to see it. The Listener Tool is
available at Cypress’ Online Store (CY3632L- WirelessUSB™ Listener).
1. Program the first PRoC Module on one of the Eval1 boards by using
2. Program the second board with the Protocol Slave Tutorial hex file.
3. Push the button (S1) on either board.
The results are the same as the Radio Tutorial. An LED on the slave board will light up.
Every time the button is pushed, the slave board will switch between LED1 and LED4, if it
is wired the same as in the assembly instructions from the WirelessUSB PRoC DVK Quick
Start Guide. See the result figures in the Radio Tutorial.
Protocol Master Tutorial
Protocol_Master_Tutorial.hex file located at \Firmware\Binaries\ by following the
“Programming” instructions on page 1.
Page 4 of 5