RN-21 Roving Networks Inc, RN-21 Datasheet

MODULE BLUETOOTH 2.0/EDR CLASS1

RN-21

Manufacturer Part Number
RN-21
Description
MODULE BLUETOOTH 2.0/EDR CLASS1
Manufacturer
Roving Networks Inc
Datasheets

Specifications of RN-21

Frequency
2.4GHz
Data Rate - Maximum
921kBaud
Modulation Or Protocol
Bluetooth v2.0+EDR, Class 1 & 2
Applications
Bluetooth v2.0
Power - Output
15dBm
Sensitivity
-80dBm
Voltage - Supply
3 V ~ 3.6 V
Current - Receiving
35mA
Current - Transmitting
65mA
Data Interface
PCB, Surface Mount
Memory Size
8MB Flash
Antenna Connector
PCB, Surface Mount
Operating Temperature
-40°C ~ 85°C
Package / Case
Module
Wireless Frequency
2.402 GHz to 2.48 GHz
Interface Type
USB, UART, PCM
Data Rate
921.6 Kbps
Modulation
FHSS
Operating Voltage
3.3 VDC
Antenna
Chip
Board Size
21.8 mm x 12.5 mm x 2 mm
Operating Temperature Range
- 40 C to + 85 C
Security
128 bit Encryption
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
740-1006
Class 1 Bluetooth® Module
Features
809 University Avenue
Block Diagram
www.rovingnetworks.com
Supports Bluetooth 2.1/2.0/1.2/1.1 standards
Class1, up to 15dBm(RN21) (100meters)
Bluetooth v2.0+EDR support
Postage stamp sized module, 15.4mm x
22mm x 1.85mm
UART (SPP or HCI) and USB (HCI only) data
connection interfaces
Sustained SPP data rates - 240Kbps (slave),
300Kbps (master)
HCI data rates - 1.5Mbps sustained, 3.0Mbps
burst in HCI mode
8MB on board flash
HCI mode, or SPP/DUN software stacks
Embedded Bluetooth stack profiles (requires
no host stack): include GAP, SDP, RFCOMM
and L2CAP protocols, with SPP and DUN
profile support.
Secure and robust link, FHSS, 128 bit
encryption, error correction and guaranteed
packet delivery.
Built in software stack for auto-discovery,
auto-connect, and instant cable modes.
Switch
RF
Los Gatos, CA 95032
PA
BALUN
Tel (408) 395-6539
Applications
Description
The RN21 Bluetooth module is perfect for embedded
applications where the Bluetooth radio must be
located within a chassis. The small form factor and
external antenna allow the RN21 to fit into many
diverse applications. The straightforward hardware
interface, castellated pads and complete software
stack provides makes it easy and reliable to design
into your end product. The RN21 provides a low
power, high performance Bluetooth module that
supports multiple protocols, including Enhanced Data
Rate (EDR). The RN21 is the solution for developers
needing to add wireless capability to their product but
can not afford to spend significant time and money
developing Bluetooth specific hardware and software.
CSR BlueCore-04
Cable replacement
Barcode scanners
Measurement and monitoring systems
Industrial sensors and controls
Medical devices
Asset tacking
External
Crystal
Memory
Flash
• info@RovingNetworks.com
DS-RN21-V2 3/25/2010
UART
GND
PIO4
PIO5
PIO6
PCM
VCC
USB
RN-21

Related parts for RN-21

RN-21 Summary of contents

Page 1

... Bluetooth specific hardware and software. Crystal CSR BlueCore-04 External BALUN PA Flash Memory • Tel (408) 395-6539 RN-21 DS-RN21-V2 3/25/2010 VCC GND PIO4 PIO5 PIO6 USB UART PCM • info@RovingNetworks.com ...

Page 2

... Tel (408) 395-6539 DS-RN21-V2 3/25/2010 Unit Bluetooth Units dBm ≤ -70 dBm dBm dBm ≤ 15 dBm dBm kHz 75 kHz kHz ≤ 1000 ...

Page 3

... Pull up 1.5K when active Input to RN21 with weak pulldown Input to RN21with weak pulldown Output from RN21 Input to RN21 with weak pulldown Input to RN21 with weak pulldown Output from RN21 Output from RN21 Output from RN21 Input to RN21 with weak pulldown Input to RN21 with weak pulldown Input to RN21 with weak pulldown • ...

Page 4

... Input logic level LOW Input logic level HIGH Output logc level LOW Output logic level HIGH All I/O’s default to weakpull down Typical Application Circuit 809 University Avenue • Los Gatos, CA 95032 DS-RN21-V2 3/25/2010 Min Typ. Max. -0.4 - +0.8 0.7VDD - VDD+0.4 ...

Page 5

... Design Concerns 1. Reset circuit. RN-21 contains a 1k pull-down to GND, the polarity of reset is active HIGH. A power on reset circuit with delay is OPTIONAL on the reset pin of the module. It should only be required if the input power supply has a very slow ramp, or tends to bounce or have instability on power up. ...

Page 6

... Ordering Information Part Number RN-21 Standard firmware (SPP/DUN Master and Slave) RN-21-H HCI firmware (HCI over H4 UART) RN-21-U USB firmware (HCI over USB port, slave device at 12Mbps rate) For other configurations, contact Roving Networks directly. Visit http://www.rovingnetworks.com Networks Products. Copyright © 2009 Roving Networks. All rights reserved. ...

Related keywords