AC4490-200M-485 Laird Technologies, AC4490-200M-485 Datasheet - Page 5

• Manufacturer Part Number: AC4490-200M-485
• Description: TXRX 900MHZ 3.3-5.5V TTL 200MW
• Manufacturer: Laird Technologies
• Series: AeroCommr

Specifications of AC4490-200M-485

• Frequency: 902MHz ~ 928MHz
• Data Rate - Maximum: 115.2kbps
• Modulation Or Protocol: FHSS, FSK
• Applications: AMR, Fire & Security Alarms, Telemetry
• Power - Output: 5mW ~ 200mW
• Sensitivity: -110dBm
• Voltage - Supply: 3.3V, 5V
• Current - Transmitting: 68mA
• Data Interface: Connector, 2 x 10 Header
• Antenna Connector: MMCX
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Wireless Frequency: 900 MHz
• Interface Type: 20-pin mini connector
• Modulation: FHSS, FSK
• Security: 1 byte System ID, DES
• Operating Voltage: 3.3 V to 5.5 V
• Output Power: 200 mW
• Antenna: Integral and External Dipole
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• Memory Size: -
• Current - Receiving: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

Revision
Version 1.0
Version 1.1
Version 1.2
Version 1.3
Version 1.4
Version 1.5
Version 1.6
Version 1.7
Version 1.8
Version 1.9
Version 2.0
Version 2.1
Version 2.2
Version 2.3
Version 2.4
Version 2.5
12/18/02 - Preliminary Release
12/20/02 - Preliminary Release. Changed location of new interface pins for higher
2/18/03 - Added Max Power Byte. Removed Write Enable references. Fixed Power
Not released.
11/07/03 - Added One beacon and modem modes. Included AC4486 product line.
7/9/04 - Changed Range Refresh so 0x00 is an invalid setting. Updated AC4490-500
1/03/04 - Changed minimum timeout at 19,200 to 3. Added support for One Beacon
7/29/05 - Removed documentation for static commands. Added Australian channels.
9/06/05 - Added Appendix 1 - Sample Power Supply
10/06/05 - Added CC 27 command. Added Long Range mode. Added EEPROM
11/08/05 - Removed CC 27 command. Removed Long Range mode. Corrected RS-
12/20/05 - Removed stream mode documentation. Added Enhanced API commands.
Not released.
Description
3/15/02 - Initial Release Version
compatibility with AC4424 family.
1/29/03 - Updated interface baud rate formula/table. Updated current consumption
table.
product family to AC4490. Multiple EEPROM read/write now allowed.
Down/Up command response. Removed peer-to-peer bit. Added Auto Destination.
Added unicast only bit. Added 500 mW product. Revised part numbers. Updated
channel number settings.
Added 500 mW specifications. Updated part numbers. Added AT Commands.
Eliminated Commercial designation; All transceivers are now Industrial qualified.
output power.
support of One Beacon mode. Added DES.
mode. Changed voltage requirements for -200. Added on the fly read temperature
and EEPROM read/write commands. Removed AC4486 product information. Added
Auto Channel.
Added CC 26 command. Updated mechanical drawing for MMXC version. Included
new RSSI table.
Acknowledgement, and Receive API modes.
write warning.
485 DE Control.
Updated Australian channels.
7/03/06 - Removed sub hop adjust documentation. Removed Configuration Mode
documentation. Added Probe command. Added Max Power Backup byte (address
0x8E). Added Product ID bytes (addresses 0x90 - 0x9F). Changed default Enhanced
API value to 0xF8. Added Serial Communications documentation. Added 4490LR-
200 documentation. Updated ording information and product tree. Added Appendix
II - 5V to 3.3V levels. Added Appendix III - API. Added Appendix IV - Sync to Channel.
Corrected RSSI plot.
Added warranty information.
Added 1x1 documentation.
Updated interface timeout information.
Updated part numbers.
Added Protocol Status, Received
D O C U M E N T I N F O R M A T I O N
Renamed
Removed