2200-00122 Laird Technologies, 2200-00122 Datasheet - Page 21
![BOARD CL4490-100-232 RS232 W/DB9](/photos/14/21/142104/2200-00122_sml.jpg)
2200-00122
Manufacturer Part Number
2200-00122
Description
BOARD CL4490-100-232 RS232 W/DB9
Manufacturer
Laird Technologies
Series
AeroCommr
Datasheet
1.CL4490-1000-232.pdf
(22 pages)
Specifications of 2200-00122
Frequency
902MHz ~ 928MHz
Data Rate - Maximum
76.8kBps
Modulation Or Protocol
FHSS, FSK
Applications
Wireless Modules
Power - Output
200mW
Sensitivity
-99dBm
Voltage - Supply
7 V ~ 18 V
Current - Receiving
40mA
Current - Transmitting
400mA
Data Interface
Connector, DB-9M
Antenna Connector
RP-SMA
Operating Temperature
-40°C ~ 85°C
Package / Case
Module
Technology/ Type
PC Board
Lead Free Status / RoHS Status
Contains lead / RoHS non-compliant
For Use With
CL4490-1000-232
Memory Size
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
CL4490 User’s Manual
4.2.2.3 PC Settings
IP Address: IP Address of the CN4490 unit.
Port: Port number of the CN4490 unit, the Port number is always 2101.
System Config: Type of CN4490 network to be configured. Valid choices are Point-to-Point
(one Server and one Client) or Point-to-Multipoint (one Server and multiple Clients).
Attention: When setting up a Point-to-Point network the Server’s Destination address must
be set to the Client’s MAC Address.
4.2.2.4 Programming the CN4490 units
Note: The Show Defaults button can be used to display the default Radio settings.
10/3/2005
1. Connect the CN4490 unit to the network.
2. Connect the power supply to the CN4490 unit. Make sure the Pwr LED is on.
3. Start the CN4490 Configuration Utility.
4. Select TCP/IP Select on the PC Settings Frame.
5. Enter the IP Address of the CN4490 that needs to be configured.
6. Select the System Configuration for the CN4490 network, Point-to-Point (one Server
7. Select Read Radio to display the current settings of the CN4490 unit.
8. Change desired settings.
9. After all changes have been made, select Write Radio to save the changes.
and one Client) or Point-to-Multipoint (one Server and multiple Clients).
21