DC-WSP-01-S Digi International, DC-WSP-01-S Datasheet - Page 20

• Manufacturer Part Number: DC-WSP-01-S
• Description: ADAPTER WI-SP CUSTOMIZABLE MODEL
• Manufacturer: Digi International
• Series: Digi Connect® Wi-SPr

Specifications of DC-WSP-01-S

• Frequency: 2.4GHz
• Data Rate - Maximum: 11Mbps
• Modulation Or Protocol: 802.11 b
• Applications: General Purpose
• Power - Output: 16dBm
• Sensitivity: -82dBm
• Voltage - Supply: 9 V ~ 30 V
• Data Interface: Connector, 9 Pin
• Memory Size: 4MB Flash, 16MB RAM
• Antenna Connector: RP-SMA
• Operating Temperature: -20°C ~ 65°C
• Package / Case: Module
• Wireless Frequency: 2.4 GHz
• Interface Type: RS-232, RS-422, RS-485, SMA
• Modulation: CCK, DBPSK, DQPSK
• Security: 64/128 WEP, WPA, 802.11i
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Current - Transmitting: -
• Current - Receiving: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: NS7520
• Other names: 602-1032; DC-WSP-01-C

GPIO Registers
2 0
G P I O
Two registers, named PORTA and PORTC, govern the 16 GPIO pins. Each register is
responsible for eight pins, and each GPIO pin uses the following four bits to completely
describe its behavior:
The first three bits describe the functionality of the GPIO pin. The data bit provides the
current value of the pin when read and allows control of the value of an output pin when
written.
In order to configure a pin as either a GPIO input or GPIO output, the corresponding bit
positions in the appropriate register must be configured according to the information in the
following table:
Since each register controls 8 GPIO pins, it is safest to read the full 32 bit register, modify
the bits corresponding to the pin, and then write the full 32 bits back. In this way, the
behavior of other GPIO pins will be preserved.
For more information regarding the format and programming of the GPIO registers, see the
NS7520 Hardware Reference.
Mode (CMODE)
Direction (CDIR)
Special function (CSF). This is only applicable to PORTC.
Data value
D i g i C o n n e c t S P H a r d w a r e R e f e r e n c e
–
–
–
CMODE = 0
CDIR = 0
CSF = 0
Input
GPIO Configuration
–
–
–
Output
CMODE = 0
CDIR = 1
CSF = 0