ZMN2430-C RFM, ZMN2430-C Datasheet - Page 3

• Manufacturer Part Number: ZMN2430-C
• Description: MODULE ZIGBEE 2.4GHZ COORDNTR
• Manufacturer: RFM
• Series: ZMNr

Specifications of ZMN2430-C

• Frequency: 2.4GHz
• Data Rate - Maximum: 250kbps
• Modulation Or Protocol: 802.15.4
• Applications: ZigBee™
• Power - Output: 18dBm
• Sensitivity: -95dBm
• Voltage - Supply: 3.3 V ~ 5.5 V
• Current - Receiving: 33mA
• Current - Transmitting: 130mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: PCB, Surface Mount
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Wireless Frequency: 2.4 GHz
• Interface Type: SPI, UART
• Modulation: DSSS, OQPSK
• Operating Voltage: 2.7 VDC to 5.5 VDC
• Output Power: 1 mW
• Operating Temperature Range: - 40 C to + 85 C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• For Use With/related Products: CC2430
• Other names: 583-1023

ZMN2430 Hardware
The major hardware component of the ZMN2430 is
the CC2430 IEEE 802.15.4 compatible transceiver
with integrated 8051 microcontroller. The ZMN2430
operates in the frequency band of 2405 to 2480 MHz
at a nominal output power of 1 mW.
Two crystals are provided to operate the CC2430, a
32 MHz crystal for normal operation and a 32.768 kHz
crystal for precision sleep mode operation.
The ZMN2430 provides a variety of application hard-
ware interfaces including an SPI interface, UART in-
terface, three 12-bit ADC inputs, two PWM (DAC)
outputs, and six general purpose digital I/O ports.
ZMN2430 Firmware
The main firmware components in the ZMN2430 in-
clude the ZigBee protocol stack and the Cirronet Stan-
dard Module (CSM) application profile. The ZigBee
Figure 1
3
protocol stack implements networking and security,
with underlying support from the 802.15.4 Media Ac-
cess Control (MAC) layer. The standard ZMN2430
firmware implements a ZigBee full function device
(FFD). This allows the module to operate as either a
coordinator or router. Optional ZMN2430 firmware is
available that implements a ZigBee reduced function
device (RFD). This allows the module to operate as an
end device. The CSM profile provides an application
programming interface (API) for all the ZMN2430 ap-
plication hardware interfaces. The CSM profile in-
cludes Network Discovery, Send/Receive Serial Data,
Read/Write SPI Port, Read ADC Inputs, Write DAC
Outputs, Read/Write GPIO and Module Configuration
services. In addition, the CSM profile provides two
sleep modes - timer sleep and interrupt sleep. See the
for the ZMN2430 ZigBee Module Developer’s Kit
User’s Manual for complete details of the CSM profile
API.