F2M03GLA-S04 Free2Move, F2M03GLA-S04 Datasheet - Page 24

• Manufacturer Part Number: F2M03GLA-S04
• Description: MOD BLUETOOTH V2.0+EDR USB W/ANT
• Manufacturer: Free2Move

Specifications of F2M03GLA-S04

• Frequency: 2.4GHz
• Data Rate - Maximum: 3Mbps
• Modulation Or Protocol: Bluetooth v2.0+EDR, Class 1, 2 & 3
• Applications: Bluetooth v2.0
• Power - Output: -20dBm ~ 8dBm
• Sensitivity: -83dBm
• Voltage - Supply: 3.1 V ~ 3.6 V
• Current - Receiving: 35mA
• Current - Transmitting: 75mA
• Data Interface: PCB, Surface Mount
• Antenna Connector: On-Board, Chip
• Operating Temperature: -40°C ~ 85°C
• Package / Case: Module
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Memory Size: -
• Other names: 647-1010-2

Rev: c
Low power Bluetooth™ Module with antenna- F2M03GLA
Datasheet
6.2.9 USB 1.1 Compliance
The Bluetooth chip on the F2M03 is qualified to the USB specification v1.1, details of which are available
from http://www.usb.org. The specification contains valuable information on aspects such as PCB track
impedance, supply inrush current and product labeling.
Although F2M03’s Bluetooth module meets the USB specification, Free2move cannot guarantee that an
application circuit designed around the chip is USB compliant. The choice of application circuit, component
choice and PCB layout all affect USB signal quality and electrical characteristics. The information in this
document is intended as a guide and should be read in association with the USB specification. Independent
USB qualification must be sought before an application is deemed USB compliant and can bear the USB
logo. Such qualification can be obtained from a USB plugfest or from an independent USB test house.
Terminals USB+ and USB- adhere to the USB specification v2.0 (Chapter 7) electrical requirements.
For ac and dc specifications for terminals USB_DETACH, USB_WAKE_UP, USB_PULL_UP and USB_ON,
refer to section PIO specification.
6.2.10 2.0 Compatibility
F2M03 is compatible with USB specification v2.0 host controllers; under these circumstances the two ends
agree the mutually acceptable rate of 12Mbits/s according to the USB v2.0 specification.
© 2006 Free2move AB
Page 24(24)