2873.000.00 FEIG Electronic, 2873.000.00 Datasheet - Page 36

• Manufacturer Part Number: 2873.000.00
• Description: ID CPR.M02 VP/AB-CA READER MOD
• Manufacturer: FEIG Electronic
• Series: OBID® Classic-pro HF CPR.M02.VP/AB-BA/-CAr

Specifications of 2873.000.00

• Rf Type: Read / Write
• Frequency: 13.56MHz
• Features: ISO14443-A, ISO14443-B, ISO15693
• Package / Case: 50mm x 50mm x 14mm
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 2873.000.00.00; 629-1057

OBID
8.4. Operating elements
8.4.1. Operating/Programming Mode: Jumper J1
Jumper J1 is used to configure the operating and programming mode of the ID CPR.M02.
In standard operation the jumper is set to Position 1-2 (see Fig. 4.3.1-1). The reader is then in
normal operating mode.
If the jumper is set to Position 2-3, the integrated hardware bootloader starts after a reset. Since
the reader’s firmware however also has a software bootloader, the hardware bootloader option
should be used only if necessary.
For additional information about programming the reader, see the corresponding Application Note
„Firmware Update“.
FEIG ELECTRONIC GmbH
®
classic-pro
Table 3.4.1-1: Jumper J1
Jumper position
1 - 2
2 - 3
X1
V1
V2
J1
Mode
Standard setting :
The reader is in normal operating mode.
Activation of the hardware bootloader:
After a reset the reader’s CPU starts its hardware
bootloader, which can then be used for new pro-
gramming.
X3
Fig. 3.4.1-1: Jumper J1
X4
Page 36 of 42
Installation
C405
C315
J1
1
3
2
M21001-3de-ID-B.doc
Default
ID CPR.M02