24-6337-8817 Kester Solder, 24-6337-8817 Datasheet - Page 4

• Manufacturer Part Number: 24-6337-8817
• Description: SOLDER NO-CLEAN 16AWG 63/37 1LB
• Manufacturer: Kester Solder
• Series: 245r
• Type: Solder, No-Cleanr

Specifications of 24-6337-8817

• Composition: Sn63Pb37 (63/37)
• Melting Point: 361°F (183°C)
• Wire Gauge: 16 Gauge - 1.1% Flux
• Diameter: 0.062" (1.57mm)
• Alloy: Sn63Pb37
• Diameter, Outer: 0.062 in.
• Weight: 1 lbs.
• Outer Diameter: 0.062"
• Solder Gauge Awg: 16AWG
• Solder Alloy: 63/37 Sn/Pb
• Melting Temperature: 183°C
• Flux Type: No Clean
• External Diameter: 0.062"
• Peak Reflow Compatible (260 C): No
• Rohs Compliant: No
• Flux Core Size No.: 50
• Flux Percent: 1.1%
• Lead Free Status / RoHS Status: Contains lead / RoHS non-compliant
• For Use With: Residue Flux for Cored Solder Wire
• Other names: KE1399

DR
Printing date 01/29/2009
Trade name: 245 CORE Sn63Pb37
Components with limit values that require monitoring at the workplace:
7440-31-5 tin
PEL
REL
TLV
7439-92-1 lead
PEL
REL
TLV
Additional information:
PEL = Permissible Exposure Limit (OSHA)
REL= Recommended Exposure Limit (NIOSH)
TLV= Threshold Limit Value (ACGIH)
OSHA= Occupational Safety and Health Administration
ACGIH= American Conference of Governmental Industrial Hygienists
NIOSH= National Institute for Occupational Safety and Health
Personal protective equipment:
General protective and hygienic measures:
Keep away from foodstuffs, beverages and feed.
Immediately remove all soiled and contaminated clothing.
Wash hands before breaks and at the end of work.
Breathing equipment:
In case of brief exposure or low pollution use respiratory filter device. In case of intensive or longer exposure use
respiratory protective device that is independent of circulating air.
When ventilation is not sufficient to remove fumes from the breathing zone, a safety approved respirator or self-
S
contained breathing apparatus should be worn.
Protection of hands:
Material of gloves:
Nitrile rubber, NBR
Natural rubber, NR
Penetration time of glove material:
The exact break through time has to be found out by the manufacturer of the protective gloves and has to be
R
observed.
Eye protection:
2 mg/m³
Metal
2 mg/m³
Tin, Metal
2 mg/m³
0.05* mg/m³
as Pb
<0.1* mg/m³
as Pb; *Blood Pb <0.06 mg/100 g whole blood
0.05 mg/m³
as Pb; BEI
Protective gloves
Tightly sealed goggles
Material Safety Data Sheet
acc. to ISO/DIS 11014
Reviewed on 01/29/2009
(Contd. on page 5)
(Contd. of page 3)
Page 4/8
USA