CTC021 3M, CTC021 Datasheet - Page 4

• Manufacturer Part Number: CTC021
• Description: ESD SENSOR
• Manufacturer: 3M
• Series: EM EYEr
• Type: ESD Sensorr

Specifications of CTC021

• Features: Hand Held
• Power Supply Type: Battery
• Equipment Type: EM Eye Meter
• Current Rating: 1000 mA
• Measured Components: ESD Sensor
• Voltage: 100 V to 240 V
• For Use With: SCP296 - EM EYE METER WITH RF SENSORSCP295 - EM EYE METER WITH EMI SENSOR
• Lead Free Status / RoHS Status: Not applicable / Not applicable
• For Use With/related Products: -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant
• Other names: 80-0012-2095-0; XA004147683

3M
Product Ordering Information
3M is a trademark of 3M Company.
SD, miniSD and microSD are trademarks of SD Association in Japan.
Electronic Solutions Division
Static Control Products
6801 River Place Blvd.
Austin, TX 78726-9000
1-866-722-3736
www.3Mstatic.com
Important Notice
All statements, technical information, and recommendations related to 3M’s products are based on information believed to be reliable, but the accuracy or completeness is not
guaranteed. Before using this product, you must evaluate it and determine if it is suitable for your intended application. You assume all risks and liability associated with such
use. Any statements related to the product which are not contained in 3M’s current publications, or any contrary statements contained on your purchase order shall have no
force or effect unless expressly agreed upon, in writing, by an authorized officer of 3M.
Warranty; Limited Remedy; Limited Liability.
This product will be free from defects in material and manufacture for a period of one year from the time of purchase. 3M MAKES NO OTHER WARRANTIES INCLUDING, BUT
NOT LIMITED TO, ANY IMPLIED WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. If this product is defective within the warranty period stated
above, your exclusive remedy shall be, at 3M’s option, to replace or repair the 3M product or refund the purchase price of the 3M product. Except where prohibited by law, 3M
will not be liable for any indirect, special, incidental or consequential loss or damage arising from this 3M product, regardless of the legal theory asserted.
Electromagnetic Field Sensor
Function Modes
Peak Range
Average Range
Memory Reference Range
Current Reference Range
Units
EIRP Distance
Antenna Factor Range
Hardware Setup
Frequency Response
RF Sensor Specifications
Unit Modes
Dynamic Range
Reference Range for Peak/Average
Record Interval Range
Record Averaging Range
External ATT
Frequency Bandwidth
Model Number
CTM048-2128
CTM048-21
CTM048-28
CTM048-29
If you’re already using the EM Eye Meter and would like to add another sensor, you can order:
CTC021
CTC028
CTC029
™
EM Eye Meter
Description
EM Eye Meter with ESD and EMI Sensors, 80-0012-2091-4
EM Eye Meter with ESD Sensor, 80-0012-2092-2
EM Eye Meter with EMI Sensor, 80-0012-2093-0
EM Eye Meter with RF Sensor, 80-0012-2094-8
ESD Sensor, 80-0012-2095-5
EMI Sensor, 80-0012-2096-3
RF Sensor, 80-0012-2097-1
Please recycle. Printed in U.S.A.
© 3M 2009. All rights reserved.
98-0799-0793-1
dBuV, dBm, mV
Min:52 dBuV Max 106.9 dBuV; Min: -55dBm-Max: 0 dBm; Min: 0.4mV Max: 223.6mV
0.100 - 224.0 mV
1 – 360 seconds
0.1 – 360 seconds
00 dB / 20 dB
1 MHz to 2.5 GHz
Electromagnetic Field
0.001 – 20.00 V/m
0.01 – 20.00 V/m
0.01 – 20.00 V/m
0.01 – 20.00 V/m
V/m, dBuV/m
-40.0 to 40.0 dBm-1
Brightness, off-time, antenna factor (AF)
10 MHz – 2.5 GHz
Power Density Meter
Min: 0.027 nW/cm2 Max: 106.1 uW/cm2
Min: 0.027 nW/cm2 Max: 106.1 uW/cm2
Min: 0.027 nW/cm2 Max: 106.1 uW/cm2
Min: 0.027 nW/cm2 Max: 106.1 uW/cm2
W/cm2
EIRP Meter
Min: 0.001W
Max: 5333 W @
20 m.
NA
NA
NA
W-m
0.25 – 20.0 m
0.82 – 65.60 ft.