A22-3200 Omron, A22-3200 Datasheet - Page 132
A22-3200
Manufacturer Part Number
A22-3200
Description
MOUNTING LATCH FOR A22 SERIES
Manufacturer
Omron
Type
Mounting Latchr
Series
A22r
Specifications of A22-3200
Accessory Type
Mounting Latch
Illumination
Not Illuminated
Mounting Style
Panel
For Use With/related Products
A22 Series
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
For Use With
A22 Series
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
A223200
Z1583
Z1583
- Current page: 132 of 265
- Download datasheet (11Mb)
Precautions
Refer to the Technical Information for Pushbutton Switches (Cat. No. A143) and the Precautions section for the A16.
Mounting
When mounting the Case onto the Socket Unit, ensure that the orien-
tation is correct. Perform mounting with the • mark on the Case and
the TOP mark on the Socket Unit facing in the same direction.
130
Cat. No. A127-E1-03
Correct Use
Case
ALL DIMENSIONS SHOWN ARE IN MILLIMETERS.
To convert millimeters into inches, multiply by 0.03937. To convert grams into ounces, multiply by 0.03527.
mark
In the interest of product improvement, specifications are subject to change without notice.
Socket Unit
TOP mark
Wiring
When using stranded wire, gather the ends of the strands together
before wiring.
When wiring, insert the wire until it comes into contact with some-
thing. After wiring is completed, pull on the wires to confirm that they
are connected securely.
After wiring, ensure that continuous pressure is not applied to the ter-
minals.
Refer to internal connections diagrams and confirm the terminal
numbers before performing wiring.
Screw-Less Clamps
Mounting Procedure
1. Strip a length of 10 mm off the end of the wire (allowable range:
2. Bunch wire strands together and straighten them.
3. Insert the wire into the insertion hole while pressing the release
4. Let go of the release button to lock the wire into place.
5. After locking, pull on the wire gently to confirm that it is securely
Removing Procedure
Remove wires by pulling them while pressing the release button.
Note: When reusing wires that have already been locked, cut off the
10 1 mm).
button at the side of the hole. (Using a precision screwdriver is
recommended.)
locked.
end of the wire and strip the wire again before using.
Related parts for A22-3200
Image
Part Number
Description
Manufacturer
Datasheet
Request
R
Part Number:
Description:
LAMP A22 SERIES 24VAC/DC LED YLW
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
LAMP A22 SERIES 24VAC/DC LED BLU
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
LAMP A22 SERIES 24VAC/DC LED GRN
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
LAMP A22 SERIES 24VAC/DC LED RED
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
SWITCH BLOCK GP DPST-NC 10A
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
LAMP A22 SER 120VAC INCANDESCENT
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
SOCKET LAMP ILLUM W/O XFRMR
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
SWITCH BLOCK MICROLOAD DPST-NC
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
SWITCH BLOCK GP DPST-NO 10A
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
LAMP INCANDESCENT 12V 22 SERIES
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
SWITCH PB RND MOM SPST-NO/NC RED
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
SWITCH PB ROUND ALT SPST-NO BLUE
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
SWITCH PB ROUND ALT SPST-NO BLK
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
SWITCH PB ROUND ALT SPST-NO GRN
Manufacturer:
Omron
Datasheet:
Part Number:
Description:
SWITCH PB ROUND ALT SPST-NO RED
Manufacturer:
Omron
Datasheet: