A16ZA-5101GY Omron, A16ZA-5101GY Datasheet - Page 24

• Manufacturer Part Number: A16ZA-5101GY
• Description: CAP 16 SERIES SQUARE LED GREEN
• Manufacturer: Omron
• Series: A16r
• Type: Cap, Squarer

Specifications of A16ZA-5101GY

• Switch Type: Pushbutton
• Shape: Square
• Color: Green
• Illumination: Illuminated
• Mounting Type: Snap Fit
• Size: 15.10mm L x 15.10mm W x 3.50mm H
• Cap Color: Green
• Length: 18 mm
• Mounting Style: Snap On
• Width: 18 mm
• For Use With/related Products: A16 Series
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• For Use With: A16, M16 Series
• Other names: A16ZA5101GY

A16
Installation
After mounting the Pushbutton Unit (i.e., the Pushbutton and the
Case) to the panel, snap in the Switch Unit (i.e., the Switch and the
Lamp) from the back of the panel.
Mounting to the Panel
Insert the Pushbutton Unit into the front of the panel, and fix the lock
ring and mounting nut from the terminal side.
Make sure that the lock ring is aligned with the thread of the Case
and the edge of the lock ring is touching the panel.
Tighten the mounting nuts to a torque of 0.29 to 0.49 N m.
The maximum tightening torque is 0.49 N m.
Mounting the Switch Unit
Snap on the Switch Unit to the Pushbutton Unit.
Make sure that the Switch Unit has the correct orientation when
snapping it onto the Case. Align the S mark on the Case with the
groove between the case guards on the NC terminal side of the
Switch Unit in the way shown below, and push the Switch Unit into
the Case until it clicks into place. Confirm that the Switch Unit is
securely in place before using.
Panel Mounting
Case
Edge
Thread
Panel
Lock ring
Groove between
case guards
mark
Mounting nut
NC terminal
Removing the Switch Unit
Grip the part between the Switch holder of the Case and the Switch
Unit using the A16Z-5080 Extractor, and pull to remove the Switch
Unit.
The Switch Unit can be mounted or dismounted by simply opening
or closing the lever.
16-mm Models
A16-P Models (with PCB Terminals)
A16Z-5080 Extractor
A16
75