PI08190 APEM Components, PI08190 Datasheet - Page 4

• Manufacturer Part Number: PI08190
• Description: PIANO STYLE DIP SWITCH
• Manufacturer: APEM Components
• Series: PIr

Specifications of PI08190

• Circuit: SPST
• Number Of Positions: 8
• Contact Rating @ Voltage: 0.025A @ 24VDC
• Actuator Type: Piano
• Actuator Level: Raised
• Mounting Type: Through Hole
• Orientation: Side Actuated
• Washable: Yes
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant

G
G4
* Note: keep switches in “OFF” position during soldering and cleaning for best results
SPST STANDARD DIP SWITCHES
DS, DA & DP SERIES
Electrical life
Contact rating, non-switching
Contact rating, switching
Contact resistance at current 100 mA
Insulation resistance at 500 VDC
Dielectric strength
Capacitance
Normally open
GENERAL SPECIFICATIONS
ELECTRICALS
MECHANICALS, THERMALS
Mechanical life
Operating force
Vibration
Shock
Operating temperature range
SOLDERING & CLEANING RECOMMENDATIONS*
Hand soldering
Wave soldering
Cleaning (with tape seal)
MATERIALS
Base
Cover
Actuators
Contacts & Terms.
Sealing
Tape seal
SWITCH
CROSS
SECTIONS
contact system
PACKAGING
DIP switches are shipped in standard IC tubes with all actuators in the "OFF" position.
APEM
, PO BOX 8288, HAVERHILL, MA USA 01835-0788 TOLL FREE: [phone] FAX: [phone] E-mail: [e-mail]
UL94V-O, glass fiber filled PBT, black
UL94V-O, glass fiber filled PBT, red
UL94V-O, glass fiber filled PBT, white
Gold over nickel plated phosphor bronze
Epoxy
Polyester film
DS & DA
2000 cycles min. per switch @ 24 VDC, 25 mA
100 mA at 50 VDC
25 mA at 24 VDC
50 mΩ max. initial - 100 mΩ max. after life test
100 MΩ minimum
500 VAC for 1 minute
5 pf. max. between adjacent terminals
2000 cycles min. per switch
1000 grams max. (DP Series only - 400 grams max.)
10-55 Hz.per MIL-STD-202F METHOD 201A
50 G (peak value) for 11 msec. per MIL-STD-202F, METHOD 213B
-40°C to 85°C
320°C max. for 2 seconds max.(30 watt iron max.)
260°C max. for 5 seconds max.
Spray wash from top side only.
DP
FEATURES
High reliability.
Self-cleaning contacts.
Multi- positions.
Process compatible with tape seal.
Dual in-line .100" x .300" term. spacing.
number of positions available (10 shown)
SCHEMATIC (TYPICAL)
See tabulations on following pages for