A6S-5104 Omron, A6S-5104 Datasheet - Page 4

• Manufacturer Part Number: A6S-5104
• Description: SWITCH DIP SMT 5POS EXT ACTUAT
• Manufacturer: Omron
• Series: A6Sr

Specifications of A6S-5104

• Circuit: SPST
• Number Of Positions: 5
• Contact Rating @ Voltage: 0.025A @ 24VDC
• Actuator Type: Standard
• Actuator Level: Raised
• Mounting Type: Surface Mount
• Orientation: Top Actuated
• Washable: No
• Contact Configuration: SPCO
• Contact Current Max: 25mA
• Switch Terminals: SMD Gull Wing
• Switch Function Configuration: OFF ON
• Pole Throw Configuration: 5P
• Total # Of Positions: 5
• Terminal Pitch (mm): 2.54mm
• Actuator Style: Raised Slide
• Current Rating (max): 0.025A
• Voltage Rating (vdc): 24V
• Contact Plating: Gold
• Mechanical Life: 1000
• Seal: No
• Operating Temp Range: -20C to 70C
• Body Orientation: Straight
• Mounting Style: Surface Mount
• Termination Style: Gull Wing
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: A6S-5104; A6S5104; SW933

Installation
I Internal Connections (Top View)
Precautions
I Circuit Design
Use the DIP Switch within the rated voltage and current ranges,
otherwise the DIP Switch may have a shortened life expectancy, radi-
ate heat, or burn out.
I Mounting
Do not operate the DIP Switch while mounting, soldering, or washing
the DIP Switch, otherwise the DIP Switch may deform due to the
heat of the solder, the DIP Switch may malfunction due to the pene-
tration of the washing agent, or the machine incorporating the DIP
Switch may operate or be set incorrectly.
An automatic insertion machine incorporating a body stopper is avail-
able for mounting the DIP Switch. When using an automatic insertion
machine incorporating a half-lead stopper to mount the DIP Switch,
make sure that the automatic insertion machine will not deform the
terminals of the DIP Switch, otherwise the improper insertion of the
DIP Switch may result.
I Soldering
Observe the following conditions when soldering the DIP Switch.
Automatic Soldering Bath
Soldering temperature:
Soldering time:
350°C at the tip of the soldering iron
3 s max. for a 1.6-mm thick, single-side
PCB
Reflow Soldering
Manual Soldering
Set the pins of the DIP Switch to OFF before soldering the DIP
Switch.
Before soldering the DIP Switch on a PCB, make sure that there is
no unnecessary space between the DIP Switch and PCB.
Before soldering the DIP Switch on a multilayer PCB, make sure that
the DIP Switch will not be deformed by the soldering heat on the pat-
tern or land of the multilayer PCB.
Do not solder the DIP Switch more than twice including rectification
soldering. An interval of five minutes is required between the first and
second solderings.
Make sure that there is no flux rise on the surface of the PCB.
Soldering temperature:
Soldering time:
DIP Switch
350°C at the tip of the soldering iron
3 s max. for a 1.6-mm thick, single-side
PCB
A6T/A6S
1193