RI-01BAA Coto Technology, RI-01BAA Datasheet - Page 2

• Manufacturer Part Number: RI-01BAA
• Description: SWITCH REED MAG GP SPST 14-23AT
• Manufacturer: Coto Technology
• Series: RI-01Br
• Type: Glass Bodyr

Specifications of RI-01BAA

• Circuit: SPST-NO
• Must Operate: 14 ~ 23AT
• Must Release: 4 ~ 21AT
• Switching Current (dc) (max): 500mA
• Switching Voltage (dc) (max): 200V
• Switching Power (max): 10W
• Magnet: Not Specified
• Mounting Type: Non-Standard (Axial)
• Termination Style: Axial (2 Leads)
• Switch Type: Dry-Reed
• Contact Form: SPST - NO
• Contact Rating: 500 mAmps
• Magnet Type: Electromagnet
• Operate Range: 14 At to 23 At
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 306-1168

* The Contact Resistance is measured using the Kelvin Method next to the glass body.
Vibration
The switches are tested in accordance with “IEC
68-2-6”, test Fc (acceleration 10G; below cross-over
frequency 57 to 62 Hz; amplitude 0.75 mm;
frequency range 10 to 2000 Hz, duration 90 minutes).
Such a vibration will not cause an open switch (no
magnetic field present) to close, nor a switch kept
closed by an 80 AT coil to open.
Mechanical Strength
The robustness of the terminations is tested in accor-
dance with “IEC 68-2-21”, test Ua
Operating and Storage Temperature
Operating ambient temperature; min: -55°C;
max: +125°C. Storage temperature; min: -55°C; max:
+125°C. Note: Temperature excursions up to 150°C
may be permissible. For more information contact your
nearest Coto Technology sales office.
sinewave; duration 11 ms). Such a shock will not cause
an open switch (no magnetic field present) to close,
nor a switch kept closed by an 80 AT coil to open.
Operate Range
Release Range
Operate Time - including bounce (typ.)
Bounce Time (typ.)
Release Time (max)
Resonant Frequency (typ.)
Switched Power (max)
Switched Voltage DC (max)
Switched Voltage AC, RMS value (max)
Switched Current DC (max)
Switched Current AC, RMS value (max)
Carry Current DC (max)
Breakdown Voltage (min)
Contact Resistance* (initial max)
Contact Resistance* (initial typ.)
Contact Capacitance (max)
Insulation Resistance (min)
Model Number
Parameters
Operating Characteristics
Electrical Characteristics
RI-01B Series Dry Reed Switch
For Most Recent Data, Consult the Coto Technology Website: www.cotorelay.com
1
Test Conditions Units
(load 40 N).
without test coil
(energization)
(energization)
RH ≤ 45%
M Ω
m Ω
m Ω
mA
mA
AT
AT
ms
ms
Hz
pF
µs
W
V
V
A
V
Soldering
The switch can withstand soldering heat in accordance
with “IEC 68-2-20”, test Tb, method 1B: solder bath at
350 ±10°C for 3.5 ±0.5 s. Solderability is tested in
accordance with “IEC 68-2-20”, test Ta, method 3:
solder globule temperature 235°C; ageing 1b: 4 hours
steam.
Welding
The leads can be welded.
Mounting
The leads should not be bent closer than 1 mm to the
glass-to-metal seals. Stress on the seals should be
avoided. Care must be taken to prevent stray magnetic
fields from influencing the operating and measuring
conditions.
RI-01BAAA
100 (20 AT)
0.05(20AT)
0.1(20AT)
70(20AT)
90 (20 AT)
3-15.5
8600
6-16
160
110
250
250
200
10
0.3
5
1
6
100 (25 AT) 150 (30AT)
0.25(29AT) 0.25(40AT)
0.15(29AT) 0.15(40AT)
RI-01BAA
90(25 AT)
30(29AT)
14-23
8600
4-21
200
140
500
500
250
10
0.3
10
1
6
6
E-mail: [e-mail]
120 (30 AT)
30(40AT)
RI-01BA
18-32
8600
5-27
0.25
200
140
500
500
300
10
10
1
6
123