8BE2SE-65-249 CH PRODUCTS, 8BE2SE-65-249 Datasheet - Page 2

• Manufacturer Part Number: 8BE2SE-65-249
• Description: JOYSTICK 8000 2AXES SNGL POLE
• Manufacturer: CH PRODUCTS
• Series: 8000r
• Type: Joystick, Panel Mountr

Specifications of 8BE2SE-65-249

• Output: Mechanical Switch
• Switch Function: 2 Axis
• Contact Rating @ Voltage: 1A @ 125VAC
• Actuator Type: Joystick
• Termination Style: Cable Leads
• Operating Force: 130gf
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: 679-2368

SWITCHING OPTIONS
The following configurations are available as standard :
Single Axis - Single Pole : One switch will actuate as the joystick moves to either end of its axis.
Single Axis - Double Pole : Two switches will actuate as the joystick moves to either end of its axis.
Single Axis - Progressive : One switch will actuate after 8 degrees of movement, with a further switch actuating after
another 10 degrees of movement, in either direction.
Single Axis - Progressive with detents : As above, but with a mechanical detent at the point of the first switch actuation in
each direction.
Dual Axes - Single Pole : One switch in each of the four positions; North, South, East and West.
Dual Axes - Double Pole : Two switches in each of the four positions; North, South, East and West.
Note : Double Pole switching is designed such that both switches in any given position trigger nominally together.
Many configurations are also available with a further microswitch actuating when the joystick is at centre, for centre
detection purposes.
GUIDED FEEL
8000 Series joysticks may also be specified with guided feel. A joystick with guided feel moves more readily towards the
poles (North, South, East and West) and whilst it can still move away from the poles, the force required to do so is greater.
Unless specified otherwise, joysticks are supplied as standard without guiding. This standard configuration allows the user
to move the joystick anywhere within the limiter with the same force and without any bias.
Note: The company reserves the right to change specifications without notice.
GENERAL DESCRIPTION
The 8000 Series is a family of rugged switch joysticks. Based on the proven mechanics of the 9000 Series, the 8000
Series utilises high quality microswitches to provide a range of possible outputs, including the option of progressive
switching on a single axis for dual speed control.
MICROSWITCHES
The 8000 Series utilises industrial quality microswitches with changeover contacts. As standard, the switches are rated to
a maximum of 1 Amp, and have gold plated contacts for reliable switching at low current levels. Please note when specifying
a joystick with a push button handle the characteristics of the push button will be different from the microswitches. Please
refer to Apem for full details and characteristics of your chosen configuration.
CABLE SPECIFICATION
As standard the joysticks are supplied utilising the normally open contacts of the microswitches. For connection to the
normally closed contacts, please specify this as part of your special modification.
Cable information may be subject to specification, please refer to Apem for details.
Connectors and custom looms may be factory fitted upon request.
Brown
14/0.12 - Fourteen strands of 0.12mm diameter tinned annealed copper wire PVC insulated to a nominal OD of 1mm.
Red
Blue
Green
Orange
7/0.127 - Seven strands of 0.127mm diameter tinned copper wire ETFE insulated, to a nominal OD of 0.7mm
Orange
All 8000 Series are supplied with 150mm of twisted cable harness, with tinned ends.
: Common
: Second Switch West
: First Switch West
: Second Switch North
: First Switch North
: First Push Button (Top of Handle)
8000 SERIES - RUGGED SWITCH JOYSTICKS
PRODUCT DESCRIPTION
www.apem.com
Black
Purple
Green
Yellow
White
Grey
: First Switch East
: Second Switch East
: First Switch South
: Second Switch South
: Centre Detect Switch
:
Second Push Button
870047v3