A22-FG-11M Omron, A22-FG-11M Datasheet - Page 30
![SWITCH PB RND MOM SPST-NO/NC GRN](/photos/17/71/177134/a22f_sml.jpg)
A22-FG-11M
Manufacturer Part Number
A22-FG-11M
Description
SWITCH PB RND MOM SPST-NO/NC GRN
Manufacturer
Omron
Series
A22r
Type
Standardr
Specifications of A22-FG-11M
Circuit
DPST (1-NO, 1-NC)
Switch Function
On-Mom, Off-Mom
Contact Rating @ Voltage
10A @ 110VAC
Actuator Type
Flush Round Button
Mounting Type
Panel Mount
Termination Style
Screw Terminal
Contact Form
SPST - NC-NO
Contact Rating
10 mAmps
Actuator
Round, Flat
Mounting Style
Panel
Illumination
Illuminated
Illumination Color
Green
Body Shape
Square
Dielectric Strength
2500 Volts
Insulation Resistance
100 MOhms
Mounting Angle
Straight
Operating Force
29.4 N
Water / Moisture Rating
IP65
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Illumination Type, Color
-
Illumination Voltage (nominal)
-
Lead Free Status / Rohs Status
Lead free / RoHS Compliant
Other names
A22FG11M
Safety Precautions for All Pushbutton Switches
For the individual precautions for a Switch, refer to the Safety Precautions in the section for that Switch.
WARNING
Do not perform wiring with power supplied to the
Switch. Do not touch the terminals or other charged
parts of the Switch while power is being supplied.
Doing so may result in electric shock.
Caution
Do not apply a voltage between the incandescent lamp
and the terminal that is greater than the rated voltage.
Doing so may damage the lamp or LED and cause the
Operation Unit to pop out.
Always turn OFF the power and wait for 10 minutes
before replacing the incandescent lamp. If the lamp is
replaced immediately after the power is turned OFF,
the remaining heat may cause burns.
Precautions for Correct Use
For details, refer to the Precautions for Correct Use in the
Technical Guide for Pushbutton Switches.
C-1
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.