A22L-GW-24A-10M Omron, A22L-GW-24A-10M Datasheet - Page 30

SWITCH PB ILL RND MOM SPST-NO

A22L-GW-24A-10M

Manufacturer Part Number
A22L-GW-24A-10M
Description
SWITCH PB ILL RND MOM SPST-NO
Manufacturer
Omron
Series
A22r
Type
Illuminatedr
Datasheet

Specifications of A22L-GW-24A-10M

Circuit
SPST-NO
Switch Function
Off-Mom
Contact Rating @ Voltage
10A @ 110VAC
Actuator Type
Round, Clear Full Guard
Illumination Type, Color
LED, White
Illumination Voltage (nominal)
24 VAC/DC
Mounting Type
Panel Mount
Termination Style
Screw Terminal
Contact Form
SPST - NO
Mounting Style
Panel
Illumination
Illuminated
Illumination Color
White
Contact Rating
10 mAmps
Ip Rating
IP65
Actuator
Round, Guarded
Body Shape
Square
Dielectric Strength
2500 Volts
Insulation Resistance
100 MOhms
Mounting Angle
Straight
Operating Force
29.4 N
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
A22LGW24A10M
Z1485
Safety Precautions for All Pushbutton Switches
For the individual precautions for a Switch, refer to the Safety Precautions in the section for that Switch.
WARNING
Do not perform wiring with power supplied to the
Switch. Do not touch the terminals or other charged
parts of the Switch while power is being supplied.
Doing so may result in electric shock.
Caution
Do not apply a voltage between the incandescent lamp
and the terminal that is greater than the rated voltage.
Doing so may damage the lamp or LED and cause the
Operation Unit to pop out.
Always turn OFF the power and wait for 10 minutes
before replacing the incandescent lamp. If the lamp is
replaced immediately after the power is turned OFF,
the remaining heat may cause burns.
Precautions for Correct Use
For details, refer to the Precautions for Correct Use in the
Technical Guide for Pushbutton Switches.
C-1
http://www.ia.omron.com/
(c)Copyright OMRON Corporation 2007 All Rights Reserved.

Related parts for A22L-GW-24A-10M