M2B15AA5W03-FA NKK Switches, M2B15AA5W03-FA Datasheet - Page 2

• Manufacturer Part Number: M2B15AA5W03-FA
• Description: SW PB SPDT .282" BK CAP SILV PCB
• Manufacturer: NKK Switches
• Series: M2r
• Type: Standardr

Specifications of M2B15AA5W03-FA

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 1A @ 125VAC
• Actuator Type: Round Button
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Contact Form: SPDT
• Contact Rating: 1 Amp
• Actuator: Plunger
• Supply Voltage: 30 Volts
• Mounting Style: Through Hole
• Terminal Seal: Epoxy
• Contact Plating: Silver
• Contact Material: Silver Alloy
• Illumination: Not Illuminated
• Flammability Rating: UL 94 V-0
• Body Length: 15.65 mm
• Mounting Angle: Right
• Operating Force: 2.94 N
• Water / Moisture Rating: Moisture Sealed
• Body Style: Miniature
• Current, Rating: 1 A
• Dielectric Strength: 1500 VAC
• Electrical Life: 25000 Operations (Min.)
• Force, Operating: 2.94 N
• Material, Bushing: Glass Fiber Reinforced Polyamide
• Material, Contact: Silver
• Material, Terminal: Brass with Silver
• Mechanical Life: 200000 Operations (Min.)
• Mounting Hole Size: 0.073 "
• Number Of Poles: 1
• Number Of Positions: 2
• Operation: On-(On)
• Resistance, Contact: 20 Milliohms (Max.)
• Resistance, Insulation: 1000 Megohms (Min.)
• Standards: UL Recognized, CSA Certified
• Temperature, Operating: -30 to +85 °C
• Termination: Solder
• Voltage, Rating: 125/30 VAC/VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Illumination Type, Color: -
• Illumination Voltage (nominal): -
• Lead Free Status / Rohs Status: Lead free / RoHS Compliant

General Specifications
NKK Switches
Electrical Capacity (Resistive Load)
Other Ratings
Materials & Finishes
Environmental Data
Installation
PCB Processing
Standards & Certifications
R
Logic/Power Level (code A):
Nominal Operating Force:
Flammability Standards:
Operating Temp Range:
UL & C-UL Recognized:
Cap Installation Force:
Power Level (code W):
Insulation Resistance:
Logic Level (code G):
Stationary Contacts:
Contact Resistance:
Dielectric Strength:
Movable Contacts:
Bushing/Housing:
Support Bracket:
Mechanical Life:
Contact Timing:
CSA Certified:
Electrical Life:
Sealing Ring:
Soldering:
Terminals:
Vibration:
Humidity:
Cleaning:
Plunger:
Travel:
Shock:
Base:
1A @ 125V AC or 1A @ 30V DC
0.4VA maximum @ 28V AC/DC maximum
(Applicable Range 0.1mA ~ 0.1A @ 20mV ~ 28V)
Combines W & G ratings
Note: Find additional explanation of dual rating & operating range in Supplement section.
20 milliohms maximum for silver; 30 milliohms maximum for gold
1,000 megohms minimum @ 500V DC
1,000V AC minimum between contacts for 1 minute minimum;
1,500V AC minimum between contacts & case for 1 minute minimum
200,000 operations minimum
25,000 operations minimum for silver; 100,000 operations minimum for gold
Single pole 2.94N & double pole 4.90N
Nonshorting (break-before-make)
Pretravel .023” (0.6mm); Overtravel .016” (0.4mm); Total Travel .039” (1.0mm)
Brass with nickel plating
Brass with tin plating
Glass fiber reinforced polyamide (UL94V-0)
Nitrile butadiene rubber
Glass fiber reinforced polyamide (UL94V-0)
Silver alloy with silver plating (code W); copper with gold plating (code G);
or silver alloy with gold plating (code A)
Silver alloy with silver plating (code W); copper with gold plating (code G);
or silver alloy with gold plating (code A)
Brass with silver or gold plating
–30°C through +85°C (–22°F through +185°F)
90 ~ 95% humidity for 96 hours @ 40°C (104°F)
10 ~ 55Hz with peak-to-peak amplitude of 1.5mm traversing the frequency range
& returning in 1 minute; 3 right angled directions for 2 hours
50G (490m/s
49.0N (11.0 lbf) for plunger A & 79.4N (17.9 lbf) for plunger B
Wave Soldering Recommended: See Profile B in Supplement section.
Manual Soldering: See Profile B in Supplement section.
Automated cleaning. See Cleaning specifications in Supplement section.
UL94V-0 rated bushing/housing & base
All models recognized at 1A @ 125V AC, 1A @ 30V DC, or 0.4A @ 28V DC;
UL File No. WOYR2.E44145; add “/U” to end of part number to order UL mark on switch;
C-UL File No. WOYR8.E44145; add “/C-UL” to end of part number to order C-UL mark on switch.
All models certified at 1A @ 125V AC, 1A @ 30V DC, or
0.4A @ 28V DC; CSA File No. 023535-0-000;
add “/C” to end of part number to order CSA mark on switch.
Process Sealed Miniature Pushbuttons
2
) acceleration (tested in 6 right angled directions, with 5 shocks in each direction)
Series M2