A22W-2MR-6A-10 Omron, A22W-2MR-6A-10 Datasheet - Page 19

• Manufacturer Part Number: A22W-2MR-6A-10
• Description: SWITCH KNOB ILLUM 2POS SPST RED
• Manufacturer: Omron
• Series: A22Wr
• Type: Standardr

Specifications of A22W-2MR-6A-10

• Circuit: SPST-NO
• Switch Function: 2 Position, Maintained
• Contact Rating @ Voltage: 10A @ 110VAC
• Illumination: Illuminated
• Illumination Type, Color: LED, Red
• Illumination Voltage (nominal): 6 VAC
• Mounting Type: Panel Mount
• Termination Style: Screw Terminal
• Panel Cutout Dimensions: 22mm (Round)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: A22W2MR6A10

Technical Information
Mounting Precautions
Wiring
•
composed of resin so contact with sharp objects may result in
damage to the surface. This kind of damage may spoil the
appearance of the Switch or result in faulty operation. Do not
throw or drop the Switch.
Perform wiring so that the lead wires will not be caught on other
objects as this will cause stress on the Switch terminals. Wire the
Switch so that there is slack in the lead wires and fix lead wires at
intermediate points. If the panel to which the Switch is mounted
needs to be opened and closed for maintenance purposes,
perform wiring so that the opening and closing of the panel will
not interfere with the wiring.
Incorrect
Incorrect
Incorrect
Hammer
Screwdriver
Do not drop or
knock the Switch.
Do not drop ob-
jects or place
heavy objects on
the Switch.
Do not operate the
Switch with heavy
or sharp objects.
•
Soldering
•
The following table gives some examples of applications using the
types of soldering given above.
With miniature Switches, the gap between the terminals is very
narrow. Use protective or heat-absorbing tubes to prevent
burning of the wire sheath or shorting.
There are two methods for soldering the Switch: hand soldering
and automatic soldering. In addition, automatic soldering itself
can be divided into two types : dip soldering and reflow soldering.
Use the soldering method appropriate for the mounting method.
Correct
Incorrect
Correct
Protective tube
Technical Information
Incorrect
17