D2F-FL Omron, D2F-FL Datasheet - Page 8

• Manufacturer Part Number: D2F-FL
• Description: LEVER SWITCH PCB SPDT 1A 25GF
• Manufacturer: Omron
• Series: D2Fr
• Type: Snap Actionr

Specifications of D2F-FL

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 1A @ 125VAC
• Actuator Type: Lever, Straight
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Operating Force: 25gf
• Contact Form: SPDT
• Contact Rating: 1 Amp at 125 Volts, 0.5 Amp at 30 Volts
• Actuator: Lever, Hinge
• Microswitch Type: Ultra Subminiature
• Actuator Style: Hinge Lever
• Operating Force Max: 25gf
• Contact Voltage Ac Nom: 125V
• Contact Voltage Dc Nom: 30V
• Contact Current Max: 1A
• Body Style: Ultra Subminiature
• Brand/series: D2F Series
• Current, Rating: 1/0.5 AAC/ADC
• Dielectric Strength: 1500 VAC
• Mounting Hole Size: 1.2 mm
• Number Of Poles: 1
• Operation: Snap Action
• Standards: UL Listed, CSA Certified
• Temperature, Operating: -25 to +65 °C with No Icing
• Termination: Through Hole
• Voltage, Rating: 125/30 VAC/VDC
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: D2FFL; SW153

Precautions
■ Mounting
Mount the D2F switch onto the PC board as shown in the following
diagram, using 2-pitch (2 x 2.54 mm) terminal spacing.
■ PC Board Machining
■ Dimensions
The use of molded components is recommended for mounting pur-
poses.
■ Molded Pin Mounting Diagram
When screw mounting, use M2 screws together with washers. Fas-
ten the screws applying 0.8 to 1 kg-cm tightening torque.
6
Snap Action Switch
D2F
■ Mounting Hole Machining
■ Dimensions
When soldering, use 6:4 solder and a 60 W soldering iron, and com-
plete soldering within 3 seconds. After soldering, do not apply exter-
nal force to the soldered area for about 1 minute.
Allow sufficient insulation distance between terminals and between
terminals and ground.