D3D-111 Omron, D3D-111 Datasheet - Page 5

• Manufacturer Part Number: D3D-111
• Description: SWITCH MINI SPDT DOOR PLUNGER
• Manufacturer: Omron
• Series: D3Dr
• Type: Miniature Door Switchr

Specifications of D3D-111

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 1A @ 125VAC
• Actuator Type: Overtravel Plunger
• Mounting Type: Panel Mount, Snap-In
• Termination Style: Connector
• Operating Force: 204gf
• Contact Form: SPDT
• Contact Rating: 1 Amp at 125 Volts, 0.5 Amp at 250 Volts
• Actuator: Plunger
• Microswitch Type: Miniature
• Actuator Style: Pin Plunger
• Operating Force Max: 204gf
• Contact Voltage Ac Nom: 250V
• Contact Current Max: 1A
• Switch Terminals: Connector
• Circuitry: SPDT
• Body Style: Miniature
• Current, Rating: 1/0.5 A
• Dielectric Strength: 1500 VAC
• Ip Rating: IP00
• Mounting Hole Size: 22.9x11.2 mm
• Number Of Poles: 1
• Operation: Snap Action
• Standards: UL 1054 (File No. E41515), CSA C22.2 No. 55
• Temperature Rating: -30 to +60 °C
• Termination: Crimp
• Voltage, Rating: 125/250 VAC
• Rating: 1 A @ 125 VAC; 0.5 A @ 250 VAC
• Operating Speed: 7.5 to 500 mm/s
• Operating Temperature: –30°C to 60°C
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: D3D111; SW745

■ Mounting Panel Cutout
Unit (mm)
Precautions
■ Cautions
Handling
Do not expose the switch to shocks, such as by dropping it. Doing so
may damage or deform the switch.
Do not apply lubrication to the sliding parts, such as pushbuttons or
actuators. Doing so may result in faulty operation or contact failure.
In order to ensure stable contact force for NO contacts, use an
operating stroke of at least 5 mm.
■ Correct Use
Mounting
This product does not have waterproof or drip-proof construction.
Ensure that water does not enter the switch interior. In particular, do
not use the switch in locations where water may be spilled or flow
over the switch. Doing so may result in deterioration of the insulation.
4
Dimensions
Miniature Door Switch
D3D
■ Connectors
The terminals connect to JST’s HL Connector.
The HL Connector consists of the following components.
Contact: SSF-21T-P1.4
Housing: HLP-03V
Wiring
Do not use the switch with a large force applied to the connector or
lead wire. Doing so may result in rattling or contact failure.
Storage Environment
Storing the switch in a plastic bag will help prevent discoloration due
to sulfuration of the (silver-plated) terminals.
Do not use the switch in locations subject to harmful gases or to high
temperatures or humidity levels. Depending on the location, it is rec-
ommended that switches be inspected between 3 and 6 months after
the date of manufacture.
Micro Loads
Even when using the switch within the operating range, if there are
inrush currents or surges, it may decrease the durability of the
switch. If necessary, insert a contact protection circuit.