D2F-L2 Omron, D2F-L2 Datasheet - Page 3

• Manufacturer Part Number: D2F-L2
• Description: SWITCH BASIC SPDT 3A 80GF PCB
• Manufacturer: Omron
• Series: D2Fr
• Type: Snap Actionr

Specifications of D2F-L2

• Circuit: SPDT
• Switch Function: On-Mom
• Contact Rating @ Voltage: 3A @ 125VAC
• Actuator Type: Lever, Roller
• Mounting Type: Through Hole
• Termination Style: PC Pin
• Operating Force: 80gf
• Contact Form: SPDT
• Contact Rating: 3 Amps at 125 Volts, 2 Amps at 30 Volts
• Actuator: Roller Lever
• Microswitch Type: Ultra Subminiature
• Actuator Style: Hinge Roller Lever
• Operating Force Max: 80gf
• Contact Voltage Ac Nom: 125V
• Contact Voltage Dc Nom: 30V
• Contact Current Max: 3A
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant, Lead free / RoHS Compliant
• Other names: D2F-L2; D2FL2; SW860

D2F
■
Note:
■
Consult your OMRON sales representative for specific models
with standard approvals.
UL1054 (File No. 41515)/
CSA C22.2 No. 55 (LR21642)
■
Note:
Contact
Minimum applicable load
(see note)
Operating speed
Operating frequency
Insulation resistance
Contact resistance
(initial value)
Dielectric strength (see note 2)
Vibration resistance
(see note 3)
Shock resistance
(see note 3)
Durability (see note 4)
Degree of protection
Degree of protection against
electric shock
Proof tracking index (PTI)
Ambient operating temperature –25°C to 65°C (at ambient humidity of 60% max.) (with no icing or condensation)
Ambient operating humidity
Weight
125 VAC
30 VDC
voltage
Characteristics
Approved Standards
Rated
Contact Specifications
1. The data given above are initial values.
2. The dielectric strength shown in the table indicates a value for models with a Separator.
3. For the pin plunger models, the values are at the free position and total travel position. For the lever models, they are at the total
4. For testing conditions, consult your OMRON sales representative.
For more information on the minimum applicable load,
refer to Using Micro Loads on page 6.
travel position.
Item
Specification
Material
Gap (standard
value)
3 A
2 A
D2F (general-
purpose)
Crossbar
Silver alloy
0.25 mm
100 mA
at 5 VDC
D2F models
1 A
0.5 A
D2F (low oper-
ating force)
1mm to 500 mm/s (pin plunger models)
Mechanical:
Electrical:
100 MΩ min. (at 500 VDC)
D2F models:
D2F-F models: 50 mΩ max.
D2F-01 models: 100 mΩ max.
600 VAC, 50/60 Hz for 1 min between terminals of the same polarity
1,500 VAC, 50/60 Hz for 1 min between current-carrying metal parts and ground, and between each
terminal and non-current-carrying metal part
Malfunction: 10 to 55 Hz, 1.5-mm double amplitude
Destruction:
Malfunction:
Mechanical:
Electrical:
IEC IP40
Class I
175
85% max. (for 5°C to 35°C)
Approx. 0.5 g (pin plunger models)
Gold alloy
1 mA at 5 VDC
D2F-01 models
---
0.1 A
200 operations/min max.
30 operations/min max.
1,000 m/s
300 m/s
1,000,000 operations min. (60 operations/min)
30,000 operations min. (30 operations/min)
D2F-01
30 mΩ max.
2
{approx. 30G} max.
2
{approx. 100G} max.
■
Contact Form
SPDT
D2F
3