HL-5100 Omron, HL-5100 Datasheet - Page 5

• Manufacturer Part Number: HL-5100
• Description: SWITCH LIMIT PIN PLUNGER
• Manufacturer: Omron
• Series: HL-5000r

Specifications of HL-5100

• Circuit: DPST (1-NO, 1-NC)
• Switch Function: On-Mom, Off-Mom
• Contact Rating @ Voltage: 5A @ 125VAC
• Actuator Type: Round (Pin Plunger)
• Mounting Type: Chassis Mount
• Termination Style: Screw Terminal
• Operating Force: 883gf
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Other names: HL5100

Mounting
To mount the Limit Switch securely, be sure to use two M5 Allenhead
bolts and washers.
The tightening torque applied to each bolt is 4.90 to 5.88 N·m. To
mount the Limit Switch more securely, use two M5 screw holes on the
rear panel and rear holes for positioning if the model is the HL-
5@@@G-Series Limit Switches.
Mounting holes
Only the HL-5@@@G has M5 x 0.8 screw holes on the rear side.
Using the Switches
Actuator Position Change
(HL-5000, HL-5030, HL-5050)
To change the angle of the actuator, loosen the Allen-head bolt on the
side of the actuator lever. Then the actuator can be set at any angle.
Loosen the
Allenhead
bold
Two, M5 screws or 5.2-dia. holes (located
diagonally for securing the front side)
Two, 5.2-dia. holes (located
diagonally for securing the rear side)
24
± 0.15
50
± 0.15
Others
Head Direction Change
(HL-5000, HL-5030, HL-5050, HL5200)
To change the head direction, loosen the two mounting screws. Then
the head can be changed at 90° increments in one of four directions.
HL-5000
HL-5030
HL-5050
The head of the HL-5200 can be mounted in two directions only.
(Refer to the following illustration.)
HL-5200
• Do not use the Limit Switch outdoors, otherwise the Limit Switch will
• The Limit Switch is not suitable in places exposed to the spray of
• If high-sealing performance is required along with shielded wiring or
become damaged by rust or ozone.
rainwater, seawater, or oily water. Consult your OMRON
representative for models resisting rainwater, seawater, and oily
water.
conduit wiring, use the D4C or WL.
Head mounting
screw (Small white
screw that can be
turned with either
a Phillips-head or
flat-blade screw-
driver)
Head mounting screw
(Black non-removable
torque screw)
Head mounting screw (white)
Head mounting screw (white)
Head mounting screw
(Small white screw that
can be turned with either
a Phillips head or
flat-blade screwdriver)
Head mounting screw
(Black non-removable
torque screw)
HL-5000
5