5636AB16 APEM Components, 5636AB16 Datasheet - Page 2
![SWITCH TOGGLE SPDT ON-ON SLDR](/photos/17/80/178060/5000_sml.jpg)
5636AB16
Manufacturer Part Number
5636AB16
Description
SWITCH TOGGLE SPDT ON-ON SLDR
Manufacturer
APEM Components
Series
5000r
Specifications of 5636AB16
Switch Function
On-On
Termination Style
Solder Lug
Circuit
SPDT
Contact Rating @ Voltage
6A @ 125VAC
Actuator Type
Standard Round
Actuator Length
5.50mm
Illumination
Non-Illuminated
Mounting Type
Panel Mount
Bushing Thread
1/4-40
Contact Form
SP
Contact Current Rating
6 Amps at 125 VoltsAC
Mounting Style
Panel
Terminal Seal
Epoxy
Contact Plating
Silver
Contact Rating
6 Amps at 125 VoltsAC
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Lead Free Status / RoHS Status
Lead free / RoHS Compliant, Lead free / RoHS Compliant
Other names
5636AB16
679-2479
679-2479
APEM
• Current/voltage rating with resistive load :
• For inductive, lamp or capacitive load, consult factory.
• Initial contact resistance : 10 mΩ max.
• Insulation resistance : 1.000 MΩ min. at 500VDC
• Dielectric strength :
• Contact bounce : 2 ms max.
• Electrical life at full load :
• Low level or mechanical life : 100.000 cycles
• Case : diallylphthalate (DAP) or
• Actuator : brass, nickel plated
• Paddles : UL94HB polyamide
• Lever caps : vinyl
• Bushing : brass, nickel plated
• Housing : stainless steel or steel
• Contacts
• Terminal seal : epoxy
1.000 Vrms 50 Hz min. between terminals
1.500 Vrms 50 Hz min. between poles
1.500 Vrms 50 Hz min. between terminals and frame
50.000 cycles for single and double pole
40.000 cycles for 3 pole
30.000 cycles for 4 pole
high temperature plastic material
(UL94-V0)
tin plated
A : silver
AD : silver, gold plated
CD : brass, gold plated
X814 : for peak currrents, see
“Special options”.
Contact
Silver (A)
Silver,
gold plated (AD)
Brass,
gold plated (CD)
MATERIALS
3A 250VAC - 6A 125VAC - 4A 30VDC
3A 250VAC - 6A 125 VAC - 4A 30VDC
Gold plating withstands up to 100mA 30VDC
0,4 VA at 20VAC or DC
Maximum
• Torque : 1,25 Nm (.922 Ft.lb) max. applied to nut
• Panel thickness : 2,5 mm (.098) with 2 nuts - 4 mm (.157) with 1 nut
• Operating temperature : -40°C to +85°C
For VDE, refer to 55000 series.
NATO
Availability : consult factory for details of approved models.
Marking : to order switches marked UL, CSA or CECC, complete appropriate
box of ordering format. The preferential list does not appear on the switches.
EN 61058-1
ELECTRICAL SPECIFICATIONS
www.apem.com
* For details, see Technical Information, end of catalogue.
AGENCY APPROVALS
5000 series
GENERAL SPECIFICATIONS
50mA 10VDC
10mA 50mV
10μA 5V
10mA 50mV
10μA 5V
Minimum
/
PREFERENTIAL LIST
Toggle switches
I and II
III and IV
I to IV
Level*
CECC 96201-007
Specifications
A-23
A