TSE3941-333ML MG Chemicals, TSE3941-333ML Datasheet - Page 6
TSE3941-333ML
Manufacturer Part Number
TSE3941-333ML
Description
ADHESIVE SEAL SIL WH FAST CURE
Manufacturer
MG Chemicals
Series
RTVr
Type
Potting Compound, 1 Partr
Specifications of TSE3941-333ML
Features
Thermally Conductive
Application
Bonding components and devices to heat sinks as well as in other bonding applications where flexibity, thermal conductivity, and flame retardance are of concern
Chemical Component
Silicone
Color
White
Dielectric Strength
22 KV⁄mm
Dispensing Method
Cartridge
Elongation
100%
Hardness
60 (Shore A)
Primary Type
Silicone
Size
333 ml
Special Features
Flame Retardant, Thermally Conductive
Specific Gravity
1.65
Standards
FDA
Temperature Range
-55 to +200 °C
Temperature, Rating
-55 to +200 °C
Tensile Strength
3 Mpa
Thermal Conductivity
0.83 W⁄m.°K
Time, Cure
24 Hr
Time, Setting
5 min.
Weight
10 Oz.
Product
Silicones
For Use With/related Products
Non Corrosive
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
{ error: graphic file not found:
E:\TC_MSDS_5028\webapps\ehswww\WEB-
INF\bin\graphics\vkoJP01.bmp }
SENSITIZATION
SKIN IRRITATION
EYE IRRITATION
MUTAGENICITY
OTHER EFFECTS OF OVEREXPOSURE
12. ECOLOGICAL INFORMATION
ECOTOXICITY
DISTRIBUTION
CHEMICAL FATE
TSE 3941 - cartg (310ml - 510g)
SILICONE ELECTRONICS ADHESIVE
found. Interim results from a two generation reproductive study in rats exposed to 500 and 700 ppm
D4 (whole body inhalation, 70 days prior to mating, through mating, gestation and lactation) resulted in
a statistically significant decrease in live mean litter size as well as extended periods of off-spring
delivery (dystocia). These results were not observed at the 70 and 300 ppm dosing levels. Preliminary
results from an ongoing 24-month combined chronic/oncogenicity study in rats exposed to 10, 30, 150,
or 700 ppm D4 showed test-article related effects in the kidney (male and female) and uterus of rats
exposed for 12 to 24 months. These effects include increased kidney weight and severity of chronic
nephropathy, increased uterine weight, increased incidence of endometrial cell hyperplasia, and an
increased incidence of endometrial adenomas. All of these effects are limited to the 700 ppm
exposure group. The relevance of these data to humans is unclear. Further studies are ongoing. In
developmental toxicity studies, rats and rabbits were exposed to octamethylcyclotetrasiloxane at
concentrations up to 700 ppm and 500 ppm respectively. No teratogenic effects (birth defects) were
observed in either study., Contains dibutyltin compound(s) - May impair fertility. May cause harm to
unborn child.
No data available
No data available
Unknown
This product contains methylpolysiloxanes which can generate formaldehyde at approximately 300
degrees Fahrenheit (150'C) and above, in atmospheres which contain oxygen. Formaldehyde is a
skin and respiratory sensitizer, eye and throat irritant, acute toxicant, and potential cancer hazard. A
MSDS for formaldehyde is available from Momentive., Methanol released during curing., Ammonia
released during curing.
No data available
No data available
No data available
No data available
Page 6/8
Material Safety Data Sheet
Version: 1.3
11/10/2007