4416B-1"X36YD 3M, 4416B-1"X36YD Datasheet

TAPE VINYL FOAM 1/16" X 1"

4416B-1"X36YD

Manufacturer Part Number
4416B-1"X36YD
Description
TAPE VINYL FOAM 1/16" X 1"
Manufacturer
3M
Series
4416r
Datasheet
1.4416B-1X36YD.pdf (4 pages)

Specifications of 4416B-1"X36YD

Tape Type
Double Coated, Double Sided
Adhesive
Acrylic, 430
Backing, Carrier
PVC (Poly Vinyl Chloride)
Thickness
0.063" (63 mils, 1.600mm) 1/16"
Width
1.00" (25.40mm)
Length
108' (32.9m) 36 yds
Color
Black
Usage
General Purpose
Temperature Range
70 ~ 100°F (21 ~ 38°C)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Thickness - Adhesive
-
Thickness - Backing, Carrier, Liner
-
Other names
021200-03281
3M44161B
4416 1" BLACK
70002454059
Double Coated Vinyl Foam Tapes
4432
Product Description
Construction
Technical Data
•
4416
•
Products
Adhesive Type:*
Adhesive Carrier:
Thickness: Nominal
Tape Color:
Release Liner:
Approximate Density:
Foam only
Tape 4432
Tape 4416
Tape 4408
*Adhesive 430 is a firm acrylic pressure sensitive adhesive which features both high initial
4408
adhesion and good high temperature holding power.
lb./ft.
(kg/m
3
3
)
Tolerance
1/32 in. (0.8 mm) Double-Coated Vinyl Foam Tape
1/16 in. (1.6 mm) Double-Coated Vinyl Foam Tape
1/8 in. (3.2 mm) Double-Coated Vinyl Foam Tape
0.025-0.040 in.
(0.64-102 mm)
Black or White
Tape 4432
(0.8 mm)
0.031 in.
1/32 in.
(560)
35
Closed Cell Polyvinyl Chloride Foam
62# Densified Kraft
Green Plaid Paper
(1.14-2.03 mm)
0.045-0.080 in.
Black or White
Tape 4416
(0.08 mm)
0.0625 in.
(1.6 mm)
0.003 in.
1/16 in.
(320)
430
20
(Supersedes September, 1998)
December, 2000
(2.29-3.81 mm)
0.110-0.150 in.
Tape 4408
Black Only
(3.2 mm)
0.125 in.
1/8 in.
(320)
20

4416B-1"X36YD Summary of contents

Page 1

... Double-Coated Vinyl Foam Tape 1/16 in. (1.6 mm) Double-Coated Vinyl Foam Tape 1/8 in. (3.2 mm) Double-Coated Vinyl Foam Tape Tape 4432 1/32 in. 0.031 in. ...

Page 2

... Double Coated Vinyl Foam Tapes 4432 4416 • 4408 • Note: The following technical information and data should be considered representative Typical Physical Properties and Performance Characteristics Products Normal Tensile: (T-Block in. (6. Jaw Speed 2"/min. (50 mm/min.) 72°F Static Shear: (As measured by static shear weight held for 100 hr ...

Page 3

... Double Coated Vinyl Foam Tapes 4432 4416 • 4408 • Application Techniques • Bond strength is dependent upon the amount of adhesive-to-surface contact developed. Firm application pressure helps develop better adhesive contact and improve bond strength. • To obtain optimum adhesion, the bonding surfaces must be clean, dry and well unified. Typical surface cleaning solvents are isopropyl alcohol and water (rubbing alcohol) or heptane. Note: Be sure to follow manufacturer’ ...

Page 4

... M shall not otherwise be liable for loss or damages, whether direct, indirect, special, incidental, or consequential, regardless of the legal theory asserted, including, but not limited to, contract, negligence, warranty, or strict liability. This Bonding Systems Division product was manufactured under a 3M quality system registered to ISO 9002 standards. 3 Bonding Systems Division 3M Center, Building 220-7E-01 St ...