897-18MMX55M 3M, 897-18MMX55M Datasheet - Page 3

• Manufacturer Part Number: 897-18MMX55M
• Description: TAPE FILAMENT 18MM X 55M CLEAR
• Manufacturer: 3M
• Series: Scotch® 897r

Specifications of 897-18MMX55M

• Tape Type: Filament
• Adhesive: Pressure Sensitive Adhesive (PSA)
• Backing, Carrier: Scotchpro™ film
• Thickness: 0.0060" (6.0 mils, 0.152mm)
• Width: 0.71" (18.00mm)
• Length: 180' (55.0m) 60 yds
• Color: Clear
• Usage: General Purpose
• For Use With: H-133 - TAPE DISPENSER HAND 19MM WIDEH131 - TAPE DISPENSER HAND 3/4" WIDEH123 - TAPE DISPENSER 3" WIDE 3" COREH122 - TAPE DISPENSER HAND - 48MM WIDTHH120 - APPLICATOR METAL 1" WIDE MAXH12 - APPLICATOR PERFORM 1" WIDE MAXH10 - APPLICATOR ECONOMY 1" WIDE MAX
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Temperature Range: -
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Other names: 00021200865244; 02120086524; 2120086524; 21200865244; 70006120078; 89718MMX55M

3M MATERIAL SAFETY DATA SHEET 897, Scotch Filament Tape
5.1 FLAMMABLE PROPERTIES
5.2 EXTINGUISHING MEDIA
Use fire extinguishers with class B extinguishing agents (e.g., dry chemical, carbon dioxide).
5.3 PROTECTION OF FIRE FIGHTERS
Special Fire Fighting Procedures: Wear full protective clothing, including helmet, self-contained, positive pressure or pressure
demand breathing apparatus, bunker coat and pants, bands around arms, waist and legs, face mask, and protective covering for
exposed areas of the head.
Unusual Fire and Explosion Hazards: No unusual fire or explosion hazards are anticipated.
Accidental Release Measures: Not applicable. Refer to other sections of this MSDS for information regarding physical and health
hazards, respiratory protection, ventilation, and personal protective equipment. Call 3M-HELPS line (1-800-364-3577) for more
information on handling and managing the spill. Pour isocyanate decontaminant solution (90% water, 8% concentrated ammonia, 2%
detergent) on spill and allow to react for 10 minutes. Or pour water on spill and allow to react for more than 30 minutes. Cover with
absorbent material. Place in a container approved for transportation by appropriate authorities, but do not seal the container for 48
hours to avoid pressure build-up.
SECTION 7: HANDLING AND STORAGE
7.1 HANDLING
Avoid breathing of dust created by cutting, sanding, grinding or machining. This product is considered to be an article which does not
release or otherwise result in exposure to a hazardous chemical under normal use conditions.
7.2 STORAGE
Not applicable. Store out of direct sunlight.
SECTION 8: EXPOSURE CONTROLS/PERSONAL PROTECTION
8.1 ENGINEERING CONTROLS
Provide appropriate local exhaust for cutting, grinding, sanding or machining. Not applicable. Use general dilution ventilation and/or
local exhaust ventilation to control airborne exposures to below Occupational Exposure Limits and/or control dust, fume, or airborne
particles. If ventilation is not adequate, use respiratory protection equipment.
8.2 PERSONAL PROTECTIVE EQUIPMENT (PPE)
SECTION 6: ACCIDENTAL RELEASE MEASURES
Autoignition temperature
Flash Point
Flammable Limits - LEL
Flammable Limits - UEL
Note: See STABILITY AND REACTIVITY (SECTION 10) for hazardous combustion and thermal decomposition
information.
Not Applicable
Not Applicable
Not Applicable
Not Applicable
05/13/2003
Page 3 of 7