9482PC 3M, 9482PC Datasheet - Page 3

• Manufacturer Part Number: 9482PC
• Description: TAPE ADHESIVE TRANSFER 1"X 60YD
• Manufacturer: 3M
• Series: 9482PCr

Specifications of 9482PC

• Tape Type: Adhesive Transfer Tape
• Adhesive: Acrylic, 350
• Backing, Carrier: Polycoated Kraft Liner
• Thickness: 0.0062" (6.2 mils, 0.157mm)
• Thickness - Adhesive: 0.0020" (2.0 mils, 0.051mm)
• Thickness - Backing, Carrier, Liner: 0.0042" (4.2 mils, 0.107mm)
• Width: 1.00" (25.40mm)
• Length: 180' (55.0m) 60 yds
• Usage: Holding, Joining, Mounting
• Temperature Range: 300°F (149°C)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Color: -
• Other names: 00021200634758; 02120063475; 2120063475; 21200634758; 70006083607

3M
9442 • 9445 • 9482PC • 9485PC • 9485EK • 9675
Environmental
Performance
Available Sizes
TM
Adhesive Transfer Tapes with Adhesive 350
Core Size: The above tapes are offered on a 3.0 inch (76.2 mm) paper core.
Minimum widths and lengths:
Maximum width: 48 inches
Normal slitting tolerance: ± 1/32 in. (0.8 mm)
Standard length: 60 yards
The properties defined are based on the attachment of impervious faceplate materials
(such as aluminum) to an aluminum test surface.
Bond Build-up: The bond strength of 3M™ Adhesive 350 increases as a function of
time and temperature.
Humidity Resistance: High humidity has a minimal effect on adhesive performance.
Bond strengths are generally higher after exposure for 7 days at 90°F (32°C) and 90%
relative humidity.
U.V. Resistance: When properly applied, nameplates and decorative trim parts are
not adversely affected by outdoor exposure.
Water Resistance: Immersion in water has no appreciable effect on the bond
strength. After 100 hours in room temperature water the bond actually shows an
increase in strength.
Temperature Cycling Resistance: Bond strength generally increases after cycling
four times through: 4 hours at 158°F (70°C)
Chemical Resistance: When properly applied, nameplate and decorate trim parts
will hold securely after exposure to numerous chemicals including gasoline, oil,
Freon™ TF, sodium chloride solution, mild acids and alkalis.
Heat Resistance: The Adhesive 350 is usable for short periods (minutes, hours) at
temperatures up to 350°F (177°C) and for intermittent longer periods (days, weeks)
up to 250°F (121°C).
Low Temperature Service: -40°F (-40°C). Parts should be tested for low
temperature shock service.
Shelf Life: Product retains its performance and properties for two year from date of
manufacture if properly stored at room temperature conditions of 72°F (22°C) and
50% R.H. Storage in a plastic bag is recommended.
(For other than standard sizes contact your 3M sales representative.)
4 hours at -20°F (-29°C)
16 hours at room temperature
- 3 -
1/8 in. to 3/8 in.
3/8 in. to 1/2 in.
1/2 in. to 1 in.
1 inch and wider - 360 yds. (329 m)
-
- 180 yds. (165 m)
- 360 yds. (329 m)
60 yds. (54.9 m) long