79200 Desco, 79200 Datasheet - Page 4

• Manufacturer Part Number: 79200
• Description: TAPE CLEAR ANTISTATIC 1/2"X36YDS
• Manufacturer: Desco

Specifications of 79200

• Tape Type: Antistatic
• Adhesive: Rubber
• Backing, Carrier: Cellulose
• Thickness: 0.0024" (2.4 mils, 0.061mm)
• Width: 0.50" (12.70mm) 1/2"
• Length: 108' (32.9m) 36 yds
• Color: Clear
• Usage: Packaging
• Temperature Range: 14 ~ 160°F (-10 ~ 71°C)
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -

TB-3010 Page 4 of 4
Applications for Aisle Marking Tape
• Use to mark off floors designating ESD Controlled areas
• Can be used as area signs
Tape Dispenser
2 inch wide Tape Dispenser Item #81281
• Use with Wescorp antistatic tapes
• For tapes with 3" Cores
• For tapes up to 2" wide
• Groundable chassis with cord
Proper Storage of Tape Rolls
For best results, tape inventory should be continually
replenished. It is recommended that rolls of tape be stored
flat and rotated (flipped over to the other side) 6 to 8 weeks.
Tapes should be stored in a dry, well ventilated room with a
reasonably consistent temperature of 68° F (20° C) and be
protected from exposure to direct sunlight. Tape should not
be stored while exposed to ultraviolet sunlight, moisture, or
heat. Tape over one year old should be evaluated by the
user to determine acceptability for the user's application.
Master packs are date coded.
Desco's Wescorp™ ESD Tape line, if stored under proper
conditions (see Note above) should retain its ESD technical
properties as described by each corresponding Technical
Drawing:
DESCO EAST - One Colgate Way, Canton, MA 02021-1407 • [phone] • Fax [phone] • Web Site: Desco.com
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone]
81281
Wescorp Antistatic Cellulose Tape
http://www.desco.com/pdf/79200.pdf
Wescorp Antistatic Conductive Shielding Grip Tape
http://www.desco.com/pdf/81250.pdf
Wescorp Antistatic High Temp Masking Tape
http://www.desco.com/pdf/81260.pdf
Wescorp Antistatic High Temp
Polyimide Tape
http://www.desco.com/pdf/81270.pdf
Usability
The user must determine the suitability for use of an
antistatic tape for his particular application.
Tape widths are nominal metric ±0.8 mm (±1/32")
• 1/4" is 6 mm nominal or 0.236"
• 1/2" is 12 mm nominal or 0.472"
• 3/4" is 18 mm nominal or 0.709"
• 1" is 24 mm nominal or 0.945"
• 2" is 48 mm nominal or 1.890"
Limited Warranty
Desco Industries, Inc. expressly warrants that for a period of one
(1) year from the date of purchase, our Wescorp Brand Antistatic
Tape will be free of defects in material (parts) and workmanship
(labor). Within the warranty period, the material will be replaced
at our option, free of charge. Call our Customer Service
Department at 909-627-8178 (Chino, CA) or 781-821-8370
(Canton, MA) for a Return Material Authorization (RMA) and
proper shipping instructions and address. Include a copy of your
original packing slip, invoice, or other proof of purchase date. Any
material under warranty should be shipped prepaid to our factory.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU
OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND
IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty will not apply to defects or
damage due to accidents, neglect, misuse, alterations, operator
error, or failure to properly maintain, clean or repair products.
Limit of Liability
In no event will Desco Industries, Inc or any seller be responsible
or liable for any injury, loss or damage, direct or consequential,
arising out of the use of or the inability to use the product. Before
using, users shall determine the suitability of the product for their
intended use, and users assume all risk and liability whatsoever
in connection therewith.
© 2008 DESCO INDUSTRIES INC.
Employee Owned