79212 Desco, 79212 Datasheet - Page 4

• Manufacturer Part Number: 79212
• Description: TAPE CLEAR ESD W/ SYM 2"X72YDS
• Manufacturer: Desco
• Type: Anti-Staticr

Specifications of 79212

• Tape Type: Antistatic - ESD Symbols
• Adhesive: Rubber
• Backing, Carrier: Cellulose
• Thickness: 0.0024" (2.4 mils, 0.061mm)
• Width: 2.00" (50.80mm)
• Length: 216' (66.0m) 72 yds
• Color: Clear
• Usage: Packaging
• Temperature Range: 14 ~ 160°F (-10 ~ 71°C)
• Special Features: Anti-Static
• For Use With: 81282 - TAPE DISPENSER ESD 2" WIDE
• Lead Free Status / RoHS Status: Lead free / RoHS Compliant
• Thickness - Adhesive: -
• Thickness - Backing, Carrier, Liner: -
• Lead Free Status / Rohs Status: RoHS Compliant part

TB-3010 Page 4 of 7
Applications for Aisle Marking Tape
• Use to mark off floors designating ESD Controlled areas
• Can be used as area signs
Tape Dispenser
2 inch wide Tape Dispenser Item #81281
• Use with Wescorp antistatic tapes
• For tapes with 3" Cores
• For tapes up to 2" wide
• Groundable chassis with cord
Proper Storage of Tape Rolls
For best results, tape inventory should be continually
replenished. It is recommended that rolls of tape be stored
flat and rotated (flipped over to the other side) 6 to 8
weeks. Tapes should be stored in a dry, well ventilated
room with a reasonably consistent temperature of 68° F
(20° C) and be protected from exposure to direct sunlight.
Tape should not be stored while exposed to ultraviolet
sunlight, moisture, or heat. Tape over one year old should
be evaluated by the user to determine acceptability for the
user's application. Master packs are date coded.
Desco's Wescorp™ ESD Tape line, if stored under proper
conditions (see Note above) should retain its ESD technical
properties as described by each corresponding Technical
DESCO EAST - 90 Hudson Road, Canton, MA 02021-1407 • [phone] • Fax [phone] • Web Site: Desco.com
DESCO WEST - 3651 Walnut Avenue, Chino, CA 91710 • [phone] • Fax [phone]
81281
Drawing:
Wescorp Antistatic Cellulose Tape
http://www.desco.com/pdf/79200.pdf
Wescorp Antistatic Conductive Shielding Grip Tape
http://www.desco.com/pdf/81250.pdf
Wescorp Antistatic High Temp Masking Tape
http://www.desco.com/pdf/81260.pdf
Wescorp Antistatic High Temp
Polyimide Tape
http://www.desco.com/pdf/81270.pdf
Usability
The user must determine the suitability for use of an
antistatic tape for his particular application.
Tape widths are nominal metric ±0.8 mm (±1/32")
• 1/4" is 6 mm nominal or 0.236"
• 1/2" is 12 mm nominal or 0.472"
• 3/4" is 18 mm nominal or 0.709"
• 1" is 24 mm nominal or 0.945"
Limited Warranty
Desco expressly warrants that for a period of one (1) year from
the date of purchase, our Wescorp Brand Antistatic Tape will be
free of defects in material (parts) and workmanship (labor).
Within the warranty period, the material will be replaced at our
option, free of charge. Call our Customer Service Department at
909-627-8178 (Chino, CA) or 781-821-8370 (Canton, MA) for a
Return Material Authorization (RMA) and proper shipping
instructions and address. Include a copy of your original
packing slip, invoice, or other proof of purchase date. Any
material under warranty should be shipped prepaid to our
factory.
Warranty Exclusions
THE FOREGOING EXPRESS WARRANTY IS MADE IN LIEU
OF ALL OTHER PRODUCT WARRANTIES, EXPRESSED AND
IMPLIED, INCLUDING MERCHANTABILITY AND FITNESS
FOR A PARTICULAR PURPOSE WHICH ARE SPECIFICALLY
DISCLAIMED. The express warranty will not apply to defects or
damage due to accidents, neglect, misuse, alterations, operator
error, or failure to properly maintain, clean or repair products.
Limit of Liability
In no event will Desco or any seller be responsible or liable for
any injury, loss or damage, direct or consequential, arising out
of the use of or the inability to use the product. Before using,
users shall determine the suitability of the product for their
intended use, and users assume all risk and liability whatsoever
in connection therewith.
© 2006 DESCO INDUSTRIES INC.
Employee Owned