MT5600BA-V92-NPS Multi-Tech Systems, MT5600BA-V92-NPS Datasheet - Page 41
![no-image](/images/no-image-200.jpg)
MT5600BA-V92-NPS
Manufacturer Part Number
MT5600BA-V92-NPS
Description
MODEM V.92 DATA/FAX WORLD
Manufacturer
Multi-Tech Systems
Series
MultiModem® IIr
Datasheets
1.SF100-G.pdf
(4 pages)
2.MT5656ZDX-EU.pdf
(55 pages)
3.MT5600BA-V92-NPS.pdf
(2 pages)
4.MT5600BA-V92-NPS.pdf
(8 pages)
5.MT5600BA-V92-NPS.pdf
(58 pages)
Specifications of MT5600BA-V92-NPS
Data Format
V.92
Interface
RS-232
Voltage - Supply
9 V ~ 12 V
Mounting Type
Desktop
Package / Case
9.0" L x 6.2" W x 1.4" H (229mm x 158mm x 36mm)
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Other names
881-1060
Note:
The V.25bis commands control synchronous communications between the host and the modem using the HDLC or
character-oriented protocol. Modulation depends on the serial port rate and setting of the transmitting clock source.
These commands apply to modems that support synchronous communications.
Command:
Description:
Command:
Description :
Command:
Description:
Values:
Command:
Description:
Values:
V.25bis Number Format:
Command: PRNx;s Program Number
Description:
Values:
Command: CRSx Call Request Address
Description:
Values:
Command: PRIa;s Program Identification Number
Description:
Command: RLD
Description:
Multi-Tech Systems, Inc. AT Commands Reference Guide (S000273G)
These commands can be used with the MT5600BA only.
Chapter 5 – V.25bis Commands
CIC
DIC
CRNs Call Request Number
CRIs Call Request Identification
Connect Incoming Call
Answers an incoming call. Values: n/a
Disregard Incoming Call
Disregards current incoming call. Values: n/a
Used to dial a number
s =dial string (0-9, *, #, :, <, =, P, T)
Used to dial a number
s =dial string (0-9, *, #, :, <, =, P, T)
0-9
:
<
=
P
T
Used to store dial string s in location x.
x=(0-3)
s = dial string (0-9, *, #, :, <, =, P, T)
Recalls dial string to dial from location x.
x=(0-3)
Dummy Command (just returns VAL).
List Request of Delayed Call Number
Returns current listing of Delayed numbers. Values: n/a.
Dialing Digit
Wait tone
Pause
Separator
Dialing to be continue in Pulse mode
Dialing to be continue in DTMF
Chapter 5 – V.25bis Commands
41