CEP-2242 CUI Inc, CEP-2242 Datasheet - Page 3
![BUZZER PIEZO 12VDC 13.7MM PCMNT](/photos/0/1/100/cep-2242_sml.jpg)
CEP-2242
Manufacturer Part Number
CEP-2242
Description
BUZZER PIEZO 12VDC 13.7MM PCMNT
Manufacturer
CUI Inc
Series
CEPr
Type
Piezo Indicator, Internal Driver
Datasheet
1.CEP-2242.pdf
(4 pages)
Specifications of CEP-2242
Frequency
4.1kHz
Voltage - Rated
12VDC
Current Rating
7mA
Size / Dimension
Circular - 13.7mm Dia x 7.6mm H
Mounting Type
Through Hole
Sound Pressure Level
70dB
Operating Mode
Continuous
Voltage Range
3 ~ 16VDC
Termination
Solder Pins/Posts
Lead Free Status / RoHS Status
Lead free / RoHS Compliant
Capacitance @ Frequency
-
Other names
102-1115
CEP2242
SEP-2242
SEP2242
CEP2242
SEP-2242
SEP2242
Available stocks
Company
Part Number
Manufacturer
Quantity
Price
Part Number:
CEP-2242
Manufacturer:
CUI原装
Quantity:
20 000
Environment Test
Item
High temp. test
Low temp. test
Humidity test
Temp. cycle test
Mechanical Characteristics
Item
Solderability
Soldering Heat Resistance
Terminal Mechanical Strength
Vibration
Drop Test
Phone: 800.275.4899
Fax: 503.372.1266
Test Condition
After being placed in a chamber at +80°C for
240 hours.
After being placed in a chamber at -30°C for
240 hours.
After being placed in a chamber at +40°C and
90±5% relative humidity for 240 hours.
The part should be subjected to 5 cycles. One
cycle will consist of:
Test Condition
Lead terminals are immersed in rosin for
5 seconds and then immersed in solder bath
of 270 ±5°C for 3 ±1 seconds.
Lead terminals are immersed up to 1.5mm from
buzzer’s body in solder bath of 300 ±5°C for
3±0.5 seconds or 260 ±5°C for 10 ±1 seconds.
For 10 seconds, the force of 9.8N (1.0kg) is
applied to each terminal in axial direction.
The buzzer should be measured after applying
a vibration amplitude of 1.5 mm with 10 to
55 Hz band of vibration frequency to each of
the 3 perpendicular directions for 2 hours.
The part will be dropped from a height of
75 cm onto a 40 mm thick wooden board 3
times in 3 axes (X, Y, Z) for a total of 9 drops.
www.cui.com
Part No: CEP-2242
Description: piezo audio indicator
9615 SW Allen Blvd Suite 103
Evaluation Standard
Evaluation Standard
90% min. of the lead terminals
will be wet with solder. (Except
the edge of the terminal)
No interference in operation.
No damage or cutting off.
The value of oscillation
frequency/current consumption
should be ±10% of the initial
measurements. The SPL should
be within ±10dB compared with
the initial measurement.
The buzzer will be measured after
being placed at +25°C for 4
hours. The value of the
oscillation frequency/current
consumption should be ±10%
compared to the initial
measurements. The SPL should
be within ±10dB compared to the
initial measurements.
Beaverton, OR 97005
Date: 7/21/2006
Unit: mm
Page No: 3 of 4